}});
.
You are here > Rigging Equipment > Rigging Page 2
.
Rigging Page 2
.
.

Rigging Page 2

Products
Display Results By .
Items 1 - 33 of 33         
Page:

S7495 - PROFESSIONAL RIGGER KIT BAG

PROFESSIONAL RIGGER KIT BAG
Over three years of development and field testing has resulted in the most complete and comprehensive Rigger's Kit Bag available today.

This has pockets for over 26 different tools, a pocket [More...]

Price: $195.00
Qty . . .
S7210 - NEEDLE SET

NEEDLE SET
If you do any amount of jumping or rigging, you need these 15 assorted sewing needles.

Shipping Weight: 4 oz. (110g)
Quantity Discount
6 - 19: $6.75
20 or more: $5.95

Price: $7.50
Qty
S7190 - SEWING PALM

SEWING PALM
A leather tool used to hand-sew harness and other heavy material. Right hand.
Shipping Weight: 4 oz. (110g)

Price: $14.95
Qty
S7405 - PACKING PIN WITH FLAG

PACKING PIN WITH FLAG
Used to temporarily hold pack closed prior to inserting the actual ripcord. An approximately 6" long pin and cable length (15cm), with an approximately 13" long warning flag installed [More...]
Quantity Discount
6 - 19: $6.45
20 or more: $5.95

Price: $9.95
Qty
S7425 - CYPRES AAD TEMPORARY PACKING PIN

CYPRES AAD TEMPORARY PACKING
This Cypres temporary packing pin is needed for packing Cypres equipped rigs where there is a small loop. Original equipment comes with warning flag installed.

NSN: 5315016154939

Shipping [More...]

Price: $10.95
Qty
I1535 - CYPRES AAD LOOP MATERIAL - 50 METER SPOOL

CYPRES AAD LOOP MATERIAL -
The Cypres loop material increases the safety of its user regardless if a Cypres is in the rig or not. It does this by improving the opening performance of the reserve container, by reducing the necessary [More...]

Price: $24.00
Qty
I1539 - CYPRES AAD LOOP MATERIAL - 200 METER SPOOL

CYPRES AAD LOOP MATERIAL -
The Cypres loop material increases the safety of its user regardless if a Cypres is in the rig or not. It does this by improving the opening performance of the reserve container, by reducing the necessary [More...]

Price: $70.00
Qty
W9523 - CYPRES AAD CLOSING LOOP

CYPRES AAD CLOSING LOOP
This is the loop you use on one pin reserves when a Cypres is installed. This is only the loop, made from the Cypres loop material, and uses existing Cypres washer.

The Cypres loop increases the safety [More...]

Price: $3.00
Qty
I1524N - PACKERS KIT FOR CYPRES AAD

PACKERS KIT FOR CYPRES AAD
This is a package of replacement parts that a parachute rigger will need from time to time when packing rigs with Cypres installations.

The Cypres Packers Kit also contains everything necessary [More...]

Price: $59.95
Qty
S7935 - HOLLOW END TEMPORARY PIN

HOLLOW END TEMPORARY PIN
The ideal tool to solve the problem with those tight reserve closing loops. This curved hollow ended temporary pin allows the dull round ripcord pin to easily push through the closing loop. Since the [More...]
Quantity Discount
6 - 19: $13.45
20 or more: $11.95

Price: $14.95
Qty
S7938 - HOLLOW END TEMPORARY PIN (FOR RSL PINS)

HOLLOW END TEMPORARY PIN (FOR
Same as No. S7935, but is made for large diameter RSL pins. It's even harder to get the RSL pin through the Cypres loop, and this makes it much easier.

The ideal tool to solve the problem with [More...]
Quantity Discount
6 - 19: $13.45
20 or more: $11.95

Price: $14.95
Qty
S7470 - SEAM RIPPER

SEAM RIPPER
For picking stitches and ripping out seams in a hurry.  Shipping weight: 2 oz. (60g)
Quantity Discount
6 - 19: $6.25
20 or more: $5.50

Price: $7.00
Qty
S7989 - FABRIC TESTING CLAMP AND SCALE KIT

FABRIC TESTING CLAMP AND SCALE
This set of tools is used to perform Parachute Industry Association TS-108 Fabric Strength Test. Replaces the old "rigger thumb test".

Comes with two fabric clamps, one 70 lb. Scale, and instructions. [More...]

Price: $145.00
Qty
S7989SC - SCALE - 70 LB

SCALE - 70 LB
This is the same 70 lb. Scale used with No. S7989 Fabric Testing Clamp and Scale Kit, but this 70 lb. Scale is sold separately.

Shipping Weight: 2 lbs. (900g)

Price: $45.00
Qty
S79875 - FABRIC TESTING CLAMPS ONLY

FABRIC TESTING CLAMPS ONLY
This is the same set of two fabric clamps used with the No. S7989 Fabric Testing Clamp and Scale Kit, but this set of two clamps is sold separately.

Shipping Weight: 2 lbs. [More...]

Price: $95.00
Qty
S7376 - MARLIN SPIKE

MARLIN SPIKE
Made from high grade carbon steel carefully hardened and tempered. Ideal for opening up webbing to cut away stitching or to make openings in material to install grommets.

Shipping weight: 12 [More...]

Price: $46.00
Qty
S7480 - MINI-PUNCH SET

MINI-PUNCH SET
A special punch set for cutting small precise holes in materials. Set consists of a handle which is threaded to accommodate seven replaceable screw tubes and cutting tubes: Sizes 5/64", 3/32", 7/64", [More...]

Price: $50.00
Qty
S7530 - AUTOMATIC AWL

AUTOMATIC AWL
Ideal for sewing nylon, leather, or canvas. The awl carries a spool of thread on the handle.

Hollow handle holds extra curved needle and wrench.

Directions with each awl for automatic [More...]

Price: $25.00
Qty
S7540 - REPLACEMENT NEEDLES FORAUTOMATIC AWL (2)

REPLACEMENT NEEDLES FOR
Sold by the package of two only.  Replacement needles for No. S7530 Automatic Awl.

Price: $9.00
Qty
S7590 - REVOLVING PUNCH

REVOLVING PUNCH
A fine quality pressed frame revolving punch. All tubes are heat treated to give long wear.

Furnished with tube sizes 0, 1, 2, 3, 5 and 7 for rigging work. 8 inches long.

Shipping Weight: [More...]

Price: $24.00
Qty
S7570 - PUNCH

PUNCH
These Drive Punches are forged from the best grade tool steel, carefully hardened and tempered with polished barrel.

The hole tapers back from the cutting edge so that the punchings clear freely [More...]
Quantity Discount
6 or more: $27.00

Price: $30.00
Qty . . .
S7670 - CUTTING PAD

CUTTING PAD
Made of a special formula resilient black vinyl, this tough cutting pad is ideal for use with arch punches or belt punches.  This new material is used by professionals for cutting material, does [More...]

Price: $24.95
Qty
S7650 - RAWHIDE MALLET

RAWHIDE MALLET
[More...]

Price: $45.00
Qty
S7995 - STAINLESS STEEL FID (SET OF 3)

STAINLESS STEEL FID (SET OF 3)
These fids are made from stainless steel. Each fid is about 3 1/4" long and the set has one 2.25mm in diameter, one 3.5mm in diameter, and one 4.5mm in diameter fid. One of these fids will finger trap [More...]
Quantity Discount
6 - 19: $29.00
20 or more: $25.95

Price: $33.00
Qty
S7979 - FINGER TRAPPING FID SET

FINGER TRAPPING FID SET
These fids are made of durable, almost impossible to break, Delrin plastic. Set of 3 different sizes, one will finger trap any of the hollow braided suspension lines currently on the market. In addition [More...]
Quantity Discount
6 - 19: $8.95
20 or more: $7.95

Price: $9.95
Qty
S7668 - MOLAR STRAP

MOLAR STRAP
Popular tool used in packing square reserves in one pin containers. The molar strap aids in controlling canopy so that it can be neatly inserted into deployment bag. Long tail acts as flag to insure removal [More...]

Price: $9.95
Qty
S7700 - CHUCK HOLDER

CHUCK HOLDER
A tool that holds all chucks listed, while using a light hammer to cinch fittings.

Used in conjunction with No. S7710 Die Holder.

Can be used to hold No. S7890 Easy Open Stud Chuck, No. S7910 [More...]

Price: $25.00
Qty
S7710 - DIE HOLDER

DIE HOLDER
Holds die upright on bench. Used in conjunction with No. S7700 Chuck Holder.

Can be used to hold No. S7890 Easy Open Eyelet Die, No. S7910 Easy Open Button Die, No. S7921 Pull-The-Dot Eyelet Die, and [More...]

Price: $49.95
Qty
S7760 - GROMMET AND WASHER - 9/16"

GROMMET AND WASHER - 9/16''
9/16" in diameter. Nickel plated brass.

Made to the same specifcations as MS22048-C1.

Sold as a set of one grommet and one washer.
Quantity Discount
6 - 19: $1.45
20 - 99: $1.35
100 or more: $1.25

Price: $1.50
Qty
S7770 - GROMMET AND WASHER - 7/16"

GROMMET AND WASHER - 7/16''
7/16" in diameter. Nickel plated brass.

Made to the same specifcations as MS22048-C2.

Sold as a set of one grommet and one washer.
Quantity Discount
6 - 19: $1.45
20 - 99: $1.35
100 or more: $1.25

Price: $1.50
Qty
S7760-S - GROMMET AND SEW-ON WASHER - 9/16"

GROMMET AND SEW-ON WASHER - 9/
9/16" in diameter. Same as No. S7760 except the washer is the sew on type.

Sold as a set of one grommet and one washer.
Quantity Discount
6 - 19: $3.15
20 - 99: $2.98
100 or more: $2.80

Price: $3.50
Qty
S7770-S - GROMMET AND SEW-ON WASHER - 7/16"

GROMMET AND SEW-ON WASHER - 7/
7/16" in diameter. Same as No. S7770 except the washer is the sew on type.

Sold as a set of one grommet and one washer.
Quantity Discount
6 - 19: $3.15
20 - 99: $2.98
100 or more: $2.80

Price: $3.50
Qty
S7510 - HEAVY DUTY SCRATCH AWLS

HEAVY DUTY SCRATCH AWLS
Made in four sizes for your convenience, each sold separately. Best quality steel blades with rugged plastic handles.

Used for piercing heavy material, hand sewing, and tacking.

Shipping [More...]
Quantity Discount
6 or more: $4.05

Price: $4.50
Qty . . .


Show items per page
Items 1 - 33 of 33         
Page:
.