parachutes skydiving

    These lenses were designed for the skydiver in mind with a low profile physical design creating less risk of line snags, and a large image area with Absolutely No Vignette! (Black corners in the image) 
    With a wide-angle lens, you can more easily include foreground subjects and emphasize the distance to the background. A wide-angle lens has a shorter focal distance than a normal lens. From any give spot an image is made with a wide-angle lens, it includes more field of view than with a normal lens. The Diamond 0.3x produces about a 110-degree field of view, the Stealth 0.5x produces about a 67-degree field of view, and the Platinum 0.2x produces about 180-degree field of view (actual field of view depends on your camcorder's specifications). Whether you prefer to use the Diamond 0.3x, the Stealth 0.5x or the Platinum 0.2x depends on how far away you think you might usually want to be from your subject.
    Do you have a JVC, Canon, Hitachi, Panasonic, Samsung or Sharp camcorder? Many of these models come in 27mm or 30.5mm thread sizes. You can now eliminate the adapter ring previously needed for any camcorder that is 27mm or 30.5mm. Another step forward for Royal Lens and the needs of its customers!
    Click on the links below for more information and pictures of this product.

• Ultra High Quality 0.3x Wide Angle Lens
• 110-degrees Field of View
• Super Low Profile (8mm in length, 44mm in diameter)
• Single Element Construction (Glass)
• Durable Anodized Aluminum Casing
• Minimal Barrel Distortion
• Absolutely NO Vignette ('black corners')
• Thread Sizes: 25mm, 27mm, 30.5mm, and 40.5mm. (Limited Thread Size Quantities Available)
• Lens Cap included

General Information:

 

    Limited thread sizes available.
    The Redesigned Ultra High Quality 0.5x Wide Angle Lens. This is the Stealth 0.5 version 2.
    Get the latest and greatest in low profile wide angle lens technology. These lenses were designed for the skydiver in mind with a low profile physical design creating less risk of line snags, and a large image area with Absolutely No Vignette! (Black corners in the image)
    With a wide-angle lens, you can more easily include foreground subjects and emphasize the distance to the background. A wide-angle lens has a shorter focal distance than a normal lens. From any give spot an image is made with a wide-angle lens, it includes more field of view than with a normal lens. The Diamond 0.3x produces about a 110-degree field of view, the Stealth 0.5x produces about a 67-degree field of view, and the Platinum 0.2x produces about 180-degree field of view (actual field of view depends on your camcorder's specifications). Whether you prefer to use the Diamond 0.3x, the Stealth 0.5x or the Platinum 0.2x depends on how far away you think you might usually want to be from your subject.
    Click on the links below for more information and pictures of this product. Shipping Weight 8 oz. (225g).

• Ultra High Quality 0.5x Wide Angle Lens
• New Flat front surface
• New Stronger Glass
• Super Low Profile (8mm in length, 44mm in diameter)
• 67-degrees Field of View
• Single Element Resilient Glass Construction
• Durable Anodized Aluminum Casing
• No Barrel Distortion
• Absolutely NO Vignette ('black corners')
• Limited Sizes Still Available: Thread Sizes: 25mm, 40.5mm and 43mm. (Limited Thread Size Quantities Available)
• Lens Cap included

General Information:

 

    Look at the world in a totally new WIDE way! The Platinum 0.2x lenses were originally designed to give an even wider point of view. Every photographer should have this lens in their arsenal. Whether you're being artistic or need to cover a wider area than usual, the Platinum 0.2x lens is the one for you. Absolutely No Vignette! (Black corners in the image) Low Distortion Fish-Eye lens and Durable Anatomized Aluminum Casing.
    Get the latest and greatest in low profile wide angle lens technology. These lenses were designed for the skydiver in mind with a low profile physical design creating less risk of line snags, and a large image area with Absolutely No Vignette! (Black corners in the image)
    With a wide-angle lens, you can more easily include foreground subjects and emphasize the distance to the background. A wide-angle lens has a shorter focal distance than a normal lens. From any give spot an image is made with a wide-angle lens, it includes more field of view than with a normal lens. The Diamond 0.3x produces about a 110-degree field of view, the Stealth 0.5x produces about a 67-degree field of view, and the Platinum 0.2x produces about 180-degree field of view (actual field of view depends on your camcorder's specifications). Whether you prefer to use the Diamond 0.3x, the Stealth 0.5x or the Platinum 0.2x depends on how far away you think you might usually want to be from your subject.
    Click on the links below for more information and pictures of this product. Shipping Weight 8 oz. (225g).

• Ultra High Quality 0.2x ULTRA Wide Angle Lens
• Super Low Profile (12mm in length, 44mm in diameter)
• 180-degrees Field of View
• Low-Distortion Fish-Eye Lens
• Dual Element Resilient Glass Construction
• Durable Anodized Aluminum Casing
• No Barrel Distortion
• Absolutely NO Vignette ('black corners')
• Thread Sizes: 25mm and 37mm. (Limited Thread Size Quantities Available)
• Lens Cap included

General Information:

Two lens caps are included with the Diamond 0.3x, Stealth 0.5x and Platinum 0.2x lenses, but sometimes we lose things. Need an extra lens cap? Plan ahead
Pick up an extra lens cap, or more. Keep one at home, keep one in your pocket, keep one wherever. Better safe than sorry.
Two lens caps create a secure case for your Diamond 0.3x, Stealth 0.5x or Platinum 0.2x. Throw your Royal Lens in your camera bag protected!
Shipping Weight: 2 oz. (60g)
 

Known as the Cookie Liquid 3, this is a 0.29x wide angle lens. It comes complete with ABS plastic carry case.
It's compact in size, and has minimal barrel distortion. It's designed to suit the Cookie BlackBox enclosures.
The Liquid 3 is a popular choice for filming outside camera on RW, freeflying and tandem skydives.
Physical size 44mm x 10mm.
Available thread sizes: 25mm, 30mm, 37mm.
Shipping Weight: 8 oz. (225g).

Known as the Cookie Liquid 5, this is a 0.45x wide angle lens. No vignetting with or without the Filter Kit option. It comes complete with ABS plastic carry case.
It's compact in size, and has minimal barrel distortion. It's designed to suit the Cookie BlackBox enclosures.
The Liquid 5 is a popular choice for filming outside camera on RW, freeflying and tandem skydives.
Physical size 44mm x 10mm.
Available thread sizes: 25mm, 30mm, 37mm.
Shipping Weight: 8 oz. (225g).

The Cookie Liquid Lens Filter Kit includes a standard 46mm UV Filter and an adaptor ring to suit the Liquid range of lenses.
Shipping Weight: 8 oz. (225g).

Here's a low-profile, low-cost, high-quality wide angle solution. The Century .55X Wide Angle Lens offers a lightweight single-element design that allows the user to go substantially wider without noticeable distortion. This lens increases the angle of view by 45% and it allows close focusing on many camcorders. It comes with two lens caps that screw onto each end, remaining secured in place. This lens has a 37mm thread size but also comes with three step-up adapter rings in sizes 27mm, 30mm and 30.5mm, which allow it to be used with multiple camcorders.
Shipping Weight: 8 oz. (225g).

The model HD-3035PRO Semi-Fish Eye conversion lens has designed to broaden the angle of view, including 180% more area in the picture, when attached to the lens of High-Definition Camcorder or Digital Camera. It's compatible with up to 6x zoom (Camocrder) area and stays in focus.
The HD-3035PRO has achieved a high definition standard of 520 lines/mm resolution power at center (MTF30%) in the Semi-Fish Eye formula. 2-group/2-element High Definition design. Ultra Wide Angle 0.3x. Lens Shade Mask & 5-adapter ring included.
Specifications:
Magnification: Nominal 0.3x. On the Digital camera: Actual 0.3x Diagonal, 0.42x Horizontal. On the Camcorder: Actual 0.34x Diagonal, 0.44x Horizontal.
Lens construction: 2-group/2-element, Coated optical glass elements.
Image distortion: -45% on the digital camera (max. wide angle), -39% on the Camcorder (max. wide angle).
Front Filter thread: None   Mounting thread 37mm.
Dimensions: 45mm x 70mm
Accessories: 5-adapter ring, Lens shade mask, Lens caps, Lens case, Instruction manual. (These adapter rings are plastic. You may wish to purchase a No. L1321 metal adapter ring which is better suited for skydiving.)
Shipping Weight: 8 oz. (225g).

The model HD-5050PRO Wide Angle conversion lens has designed to broaden the angle of view, including 100% more area in the picture, when attached to the lens of High Definition Camcorder. It's compatible with the whole zoom area and stays in focus*.
The HD-5050PRO is made of the high-index optical glass elements with new concept of lens designing using three-group/four-element lens formula. This new concept in designing the lens made it possible to achieve a high definition wide angle lens of the 600 lines/mm resolution power at center (MTF30%). 3-group/4-element High Definition design. Compatible with whole zoom area. 62mm front filter size.
Specifications:
Magnification: Nominal 0.5x, Actual 0.50x Diagonal, 0.53x Horizontal.
Lens construction: 3-group/4-element, Coated optical glass elements.
Image distortion: -13.5%(max. wide angle).
Front Filter thread: 62mm.
Mounting thread: 37mm.
Dimensions: 40mm x 66mm.
Accessories: 6-adapter ring, Lens caps, Lens case, Instruction manuals. (These adapter rings are plastic. You may wish to purchase a No. L1321 metal adapter ring which is better suited for skydiving.)
Shipping Weight: 8 oz. (225g).  

These Step Up Adapter Rings can help fit together almost an video camera on the market today with a 37mm Diamond 0.3x, Stealth 0.5x, or Platinum 0.2x lens. This is especially helpful if your camera's thread size does not come in the standard thread sizes for these lenses, or if you have downsized to a different camera/thread size, and want to keep the same lens. Example : 27mm to 37mm means that a camera with a 27mm thread size will use this Step Up Adapter Ring to fit to a 37mm Diamond 0.3x, Stealth 0.5x, or Platinum 0.2x lens lens. Color: The 25mm to 37mm ring is silver and the rest are black. Shipping Weight: 2 oz. (60g).

General Information:

The Ops Drops are an Anti-Fog and Lens cleaner used by the U.S. Armed Forces typically in more dry environments. It can be used with any goggle, glass lens or plastic lens, Headgear Visors, Face Shields, Night Vision Goggles, Binoculars, Chemical & Gas Masks, Scopes, Dive Masks and Sunglasses. Recommended for use with Oxygn, Factory Diver and Flip-Up Factory Diver lenses. We have found it to be very effective on the Sorz, Kroops, Sky Eyes, and Ultimate Sports goggles. New goggles with a treated anti-fog lens tend to show little or no anti-fog difference with the Ops Drops applied. The Ops Drops come with a soft lens cleaning cloth that will help clean your goggle or lens without scratching. Make sure to rinse off your goggle or lens in water first, to help remove any fine dust, dirt, or sand that could possible scratch your goggle or lens when cleaning it. Will not harm surrounding silicone or rubber support frames. Not recommended for swim goggles.
 Shipping Weight 8 oz. (225g).

Smaller, lighter and 2X more powerful, again: The Wi-Fi enabled HERO3: Black Edition is the most advanced GoPro, ever. No expense was spared during its development, resulting in a GoPro that is 30% smaller, 25% lighter and 2x more powerful than previous models. Wearable and gear mountable, waterproof to 197' (60m), capable of capturing ultra-wide 1440p 48fps, 1080p 60 fps and 720p 120 fps video and 12MP photos at a rate of 30 photos per second, the HERO3: Black Edition is the world's most versatile camera. Built-in Wi-Fi, GoPro App compatibility and the included Wi-Fi Remote (normally a separate $79.99 accessory) make the HERO3: Black Edition all the more versatile, still.

Smaller, Lighter...Better: Weighing in at a scant 2.6 ounces, the HERO3: Black Edition is 25% lighter and 30% smaller than previous models.

2X Faster Video Performance: The HERO3: Black Edition captures professional, cinema-quality video at 2X the resolution and 2X the frame-rate of previous models while delivering 2X better low light performance. Slow-motion aficionados and industry professionals will love the HERO3: Black Edition's 1080p-60, 720p-120, WVGA-240, 960p-100 and 1440p-48 video modes while those desiring a cinematic look will appreciate the ultra-high resolution 2.7KP-30 fps and 4KP-15 fps (Protune only) video modes.

3X Faster Photo Performance: The HERO3: Black Edition's photo performance is 3X improved, now boasting 12MP burst capture at a staggering 30 frames per second with 2X better low light performance compared to previous models. Still Photo and Time-lapse Photo modes remain the same but are now joined by a new Continuous Photo mode that captures continuous 12MP stills at a steady 3, 5, or 10 photo-per-second rate, up to 30 photos at a time.

Improved Sharpness, Less Distortion: The HERO3's reduced-distortion, 6-element aspherical lens combines with user-selectable Ultra-wide, Medium and Narrow field-of-views to deliver more perspective-capture options than ever before. Add the totally updated flat-lens waterproof housing that delivers stunning image sharpness both above and below water and you've got one of the most powerful and durable image capture solutions on the planet.

Redesigned Audio System: Understanding that sound quality is as important as image quality, GoPro engineers completely redesigned the HERO3 to be as adept at capturing the subtle, natural sounds of voice and music as it is at capturing the immersive sounds of sport. Also improved is GoPro's already famous wind-noise reduction, ensuring that you'll hear more of your passion, be it your engine or expletives, and less of the wind during high speed activities.

Built-in Wi-Fi (Wi-Fi Remote Included): The HERO3 Black Edition features built-in Wi-Fi and includes GoPro's Wi-Fi Remote accessory. The Wi-Fi Remote is normally available as a $79.99 accessory but is included with the HERO3: Black Edition. The Wi-Fi Remote is waterproof, wearable and can control up to 50 Wi-Fi-enabled GoPros at a time from a range of 600'. The HERO3's built in Wi-Fi means it can also be controlled by iOS smartphones and tablets running the GoPro App*. The GoPro App enables full camera control and live scene preview on any compatible iOS smartphone or tablet. * A software update for your HERO3 camera is required before using the GoPro app. Click here to update your HERO3 product software.

The HERO3: Black Edition is compatible with all GoPro mounting accessories and older generation BacPacs™ along with the newer generation LCD Touch BacPac and 2nd generation Battery BacPac. However, as all HERO3 cameras have a new size and shape and are not compatible with HERO2 housings.
United States Sales Only. This product cannot be sold Internationally.
 

What's Included

• HERO3: Black Edition Camera
• 197’/ 60m Waterproof Housing*
• Wi-Fi Remote + Key Ring
• Remote Charging Cable
• Rechargeable Li-ion Battery
• QR Buckle
• J-Hook Buckle
• 3-Way Pivot
• 1 Curved Adhesive Mount
• 1 Flat Adhesive Mount
• Assorted Mounts and Hardware
• USB Charging Cable

Smaller, lighter with built-in Wi-Fi:
The HERO3: Silver Edition boasts the same high performance specs as the famous HD HERO2 camera it replaces, yet it has built-in Wi-Fi and is 30% smaller and 25% lighter. The HERO3: Silver Edition is wearable and gear mountable, waterproof to 197' (60m), and is capable of capturing ultra-wide 1080p 30 fps and 720p 60 fps video plus 11MP photos at a rate of 10 photos per second.

Smaller, Lighter...Better: Weighing in at a scant 2.6 ounces, the HERO3: Silver Edition is 25% lighter and 30% smaller than the HD HERO2 camera it replaces.

Professional Quality Video:The HERO3: Silver Edition captures professional quality video at 1080p-30, 720p-60, 960p-48 and WVGA-120 resolutions and frame rates.

Professional Quality Photos: The HERO3: Silver Edition captures 11MP still photos and has a burst capture rate of 10 frames per second. Time-lapse photo capture mode enables automatic photo capture at 0.5, 2, 5, 10, 30 and 60 second intervals.

Improved Sharpness, Less Distortion: The HERO3: Silver Edition's reduced-distortion aspherical lens combines with user-selectable 1080p Ultra-wide, Medium and Narrow field-of-views to deliver more perspective-capture options than are available on the White Edition camera. The totally updated flat-lens waterproof housing delivers stunning image sharpness both above and below water.

Redesigned Audio System: Understanding that sound quality is as important as image quality, GoPro engineers completely redesigned the HERO3: Silver Edition to be as adept at capturing the subtle, natural sounds of voice and music as it is at capturing the immersive sounds of sport. Also improved is GoPro's already famous wind-noise reduction, ensuring that you'll hear more of your passion, be it your engine or expletives, and less of the wind during high speed activities.

Built-in Wi-Fi: The HERO3: Silver Edition features built-in Wi-Fi and is compatible with both the Wi-Fi Remote (optional accessory) and the GoPro App. The Wi-Fi Remote (not included) is a waterproof, wearable remote control that can control up to 50 Wi-Fi-enabled GoPros at a time from a range of 600'. The HERO3: Silver Edition's built in Wi-Fi means it can also be controlled by iOS smartphones and tablets running the GoPro App*. The GoPro App enables full camera control and live scene preview on any compatible iOS smartphone or tablet. *A software update for your HERO3 camera is required before using the GoPro app. Click here to update your HERO3 product software.

The HERO3: Silver Edition is compatible with all GoPro mounting accessories and older generation BacPacs™ along with the newer generation LCD Touch BacPac and 2nd generation Battery BacPac. However, as all HERO3 cameras have a new size and shape and are not compatible with HERO2 housings.
United States Sales Only. This product cannot be sold Internationally.

What's Included

• HERO3: Silver Edition Camera
• 197’/ 60m Waterproof Housing*
• Rechargeable Li-ion Battery
• QR Buckle
• J-Hook Buckle
• 3-Way Pivot
• 1 Curved Adhesive Mount
• 1 Flat Adhesive Mount
• Assorted Mounts and Hardware
• USB Charging Cable

Want to dress up your GoPro Hero3 with something better or more colorful?
This aluminum lanyard ring replaces the current lens ring on your GoPro Hero3, and features a lanyard slot on the side of the ring. This allows you to attach a lanyard of your choice from your GoPro Hero3 to whatever it is mounted on. With this you will not lose your GoPro Hero3. in case your mount comes loose for any reason.
Shipping Weight: 4 oz. (110g).

Want to dress up your GoPro with something better or more colorful?
Replace your plastic stock knob on your GoPro with a colorful aluminum knob. These knobs are machined out of 6061 aluminum and are built to last. Easily tighten your camera down and be confident that it will not move or wiggle loose.
Shipping Weight: 4 oz. (110g).

Want to dress up your GoPro with something better or more colorful?
Replace your plastic stock long knob on your GoPro with a colorful aluminum short knob. The knobs offer a lower profile than the regular long knob. These knobs are machined out of 6061 aluminum and are built to last. Easily tighten your camera down and be confident that it will not move or wiggle loose.
Shipping Weight: 4 oz. (110g).

This machined aluminum mount provides reliable attachment to your headgear, as opposed to adhesive mounts. It will mount flush to any flat surface, but small enough to be used with some curved surfaces as well. Comes with two mounting screws.
Dimensions: 1 11/16" L X 1 13/16" W X 3/8" D.
Shipping Weight: 4 oz. (110g).

This machined aluminum mount provides reliable attachment, as opposed to adhesive mounts, and can be used in a number of different ways.
The mount allows you to attach your GoPro onto your 1" chest strap, or other 1" webbing.
This mount also comes with a threaded tripod hold in the middle to easily use with any type of camera quick release plate (Flatlock, Quick Quad, Goldmember, Schumacher Quick Shoe, etc).
Alternatively you can place your GoPro on planes, hangars, trees, poles, or anything large or misshaped using the attachment slots. A great way to set up shots and not leave a permanent mount behind.
Dimensions: 1 3/4" L X 2" W X 0.5" D.
Shipping Weight: 4 oz. (110g).

This machined aluminum mount provides reliable attachment, as opposed to adhesive mounts, and can be used in a number of different ways.
The mount allows you to attach your GoPro onto your 1 3/4" chest strap, or other 1 3/4" webbing.
This mount also comes with a threaded tripod hold in the middle to easily use with any type of camera quick release plate (Flatlock, Quick Quad, Goldmember, Schumacher Quick Shoe, etc).
Alternatively you can place your GoPro on planes, hangars, trees, poles, or anything large or misshaped using the attachment slots. A great way to set up shots and not leave a permanent mount behind.
Dimensions: 2 1/4" L X 2" W X 0.5" D.
Shipping Weight: 4 oz. (110g).

The Low Profile GoPro Headgear Mount is not only cool looking, but also small. This small size will help to protect against pilot chute entanglements and riser strikes. The Low Profile GoPro Headgear Mount can be attached anywhere on your headgear with the included hardware, although it works best on a curved surface. All you need to do is drill two 5.5-6mm holes. The mount is CNC machined from aircraft grade aluminum. It is so sturdy that you no longer need to dummy cord your camera to your headgear for fear of losing it.
Low Profile GoPro Headgear Mount includes :
2 x black nylon screws. These are break-away screws for when you are jumping with just the GoPro. They are included for people that have no plans of using any type of extension or extension bar, and want an additional break-away safety feature in the event of an entanglement.
2 x steel screws. These are for when you are using an extension or extension bar. DO NOT jump an extension or extension bar with the break-away nylon screws. You may lose your camera on opening.
1 x  Low Profile GoPro Headgear Mount. 1.6" x 0.9" x 0.45" (4cm x 2.3cm x 1.1cm).
Shipping Weight: 4 oz. (110g).

Don't risk losing your GoPro camera by attaching it to a headgear with adhesive, stick-on pads!  You can securely attach the Quick Mount precision crafted headgear mounting bracket to the brow of most headgear. It's made of strong, lightweight aluminum and is designed specifically for skydiving. Once a GoPro HD Hero camera is attached to the Quick Mount (one screw) you can easily adjust the camera's angle for optimal shooting. When you decide on the right angle then just tighten the locking screw and you're ready to go. The Quick Mount also lets you remove the GoPro camera from the protective housing while still on the headgear.
Shipping Weight: 6 oz. (170g).

This is the new single GoPro Hero3 hand mount with swivel. The swivel feature allows you to rotate the camera 360 degrees, back and forth, in order to get the best possible angle. This is a great solution for those looking for a low-profile GoPro hand mount, a.k.a Floydie with Swivel.
 This hand mount is meant to be used only with the GoPro Hero3 camera, and not with any of its waterproof or skeleton cases, in order to be as low-profile as possible. As a result this hand mount is not waterproof. There is padding around the camera which will provide some protection against bumps and impact. The Velcro and zipper closures allow for easy access to the camera ports. The front of the camera is easily visible through the plastic cover.
This is a one size fits all hand mount, and has two adjustable straps on the back to tighten or loosen the mount.
Shipping Weight: 6 oz. (170g).

Get a FREE GoPro Hand Mount Quick Release with a purchase this No. L12642 Single GoPro Hand Mount. While supplies last.
This is a great solution for those looking for a low-profile GoPro Hero2 hand mount, a.k.a Floydie.
 This hand mount is meant to be used only with the GoPro Hero2 camera, and not with any of its waterproof or skeleton cases, in order to be as low-profile as possible. As a result this hand mount is not waterproof. There is padding around the camera which will provide some protection against bumps and impact. The Velcro and zipper closures allow for easy access to the camera ports. The front of the camera is easily visible through the plastic cover.
This is a one size fits all hand mount, and has two adjustable straps on the back to tighten or loosen the mount.
Shipping Weight: 6 oz. (170g).

This is a great solution for those looking for a low-profile GoPro Hero2 hand mount. This Dual GoPro Hand Mount, a.k.a Floydie Pro, will allow you to use two GoPro Hero or Hero2 cameras simultaneously. The idea behind this is to set the bottom camera for still photos and the top camera for video. Please note: When setting the bottom GoPro Hero2 for still photos, you will need to access the menu and tell the camera to function from the front button.
This hand mount is meant to be used only with the GoPro Hero or Hero2 camera, and not with any of its waterproof or skeleton cases, in order to be as low-profile as possible. As a result this hand mount is not waterproof. There is padding around the camera which will provide some protection against bumps and impact. The Velcro and zipper closures allow for easy access to the camera ports. The front of the camera is easily visible through the plastic cover.
This is a one size fits all hand mount, and has two adjustable straps on the back to tighten or loosen the mount.
Shipping Weight: 6 oz. (170g).

Pre-Order Today! Coming Soon!
The New Cookie Universal Hand Mount offers a range of features ideal for small format camera users. The camera is easily rotated but stays locked in place using a unique graduated adjustment that can be rotated while on the fly. Included is a frictional rotating disc that allows the user to more easily rotate to an infinite angle choice. Setups include, Sony Action Cam and Drift as standard. Adding the Aluminum No. L5763 Cookie Low-Profile GoPro Mount adaptor gives you a setup ideal for the GoPro Hero2 or 3. The Cookie Contour Headgear Mount allows you to easily mount the Contour range of Cameras.
Shipping Weight: 8 oz. (225g).

Pre-Order Today! Coming Soon!
This mount is designed to attach to the No. L5762 Cookie Universal Hand Mount and keep your GoPro camera as close to the hand as possible.
Shipping Weight: 4 oz. (110g).

What's Included:

• 1 Wrist Housing
• 1 Neoprene/Velcro Wrist Strap
• 1 Waterproof Backdoor
• 1 Skeleton Backdoor
• 1 BacPac Backdoor

Drop inserts into sides of camera housing to prevent fogging in cold and humid environments. To Reuse: Inserts will last for approximately 4 uses. To dry out and reuse, heat inserts on a pan in oven at 300° F for 5 minutes. Store in an airtight bag. For use with all cameras.
United States Sales Only. This product cannot be sold Internationally.

This allows for low-profile positioning of your GoPro camera on the front of your headgear, like a headlamp. It also extends out in front of the headgear so you can turn the camera back on yourself for self-portrait videos and photos. Camera NOT included.
United States Sales Only. This product cannot be sold Internationally.

What’s Included:

• 1 Helmet Front Mount
• Warranty: One Year

The Contour+2 is the next evolution in action video. Innovation is at the forefront of the design process with the Contour+2. Bluetooth capabilities allow your mobile device to be used as a viewfinder and remote control for your camera. Built-in GPS tracks your speed, elevation, and distance all while you're recording. Share enhanced videos full of rich data across the social networks you use most.
We took our most coveted features from the ContourROAM and the original Contour+ and created a camera that is not only easier to use, but brings an entirely new perspective to your adventures. Share beautiful 1080p HD video with speed, distance, and elevation across the social networks you use most. Featuring even better video quality, an Instant On-Record switch, and a 60-meter waterproof case for those underwater adventures, the Contour+2 will bring your stories to life like never before.

The ContourROAM2 brings brilliant updates to the ContourROAM, while retaining the features that made it a best seller. Still the simplest camera to use on the market, the locking Instant On- Record switch makes it easy to get the perfect shot. We've also upped the frame rate to 60fps at 720p, and fine- tuned the picture giving the video quality incredible clarity. Note: Battery is built in and not removable.
Locking Instant On-Record Switch - No power button, no problem. Simply slide the Instant On-Record switch into its locking position to ensure you shoot exactly when you're ready.
60fps - As requested by our users, we've bumped up the frames per second to 60 when shooting at 720p, meaning you can now get that smooth video quality you've come to expect from Contour cameras.
Waterproof without a case - Good things come in small packages. The ContourROAM2 sheds bulk by working underwater without an extra case. Minimalism is a good thing.
Low-profile design - Contour cameras have won numerous awards for their stylish, yet functional, low-profile design. The ContourROAM2 is exceptionally designed and lightweight. With the ContourROAM2, less really is more.
Versatility - Whether snorkeling, snowboarding, or tearing up single track, the ContourROAM2 is ready for any adventure. It's compatible with every Contour mount giving you unlimited angles. The 270° rotating lens means no matter where the camera is mounted, you'll always get the perfect, level shot.
Laser Alignment - Get the correct angle any time with the built-in laser level.
Long Battery Life - Shoot up to 3.5 hours of footage. The Instant On-Record switch means there is no standby mode. The battery is only in use when shooting, giving you more bang per charge.
MicroSD Card Included - We've added a 4GB MicroSD card so your camera is ready to use right out of the box.

The Contour Hand Mount is an effective and affordable hand mounted HD camera solution It has been designed to be rugged, durable, and reliable. The Contour slides into place on the plastic mount rails. The Contour can be dummy corded to the mount with the standard Contour lanyard to ensure you never lose your camera during a skydive. The Contour Hand Mount will easily adjust to different hand sizes with its large finger ring and adjustable Velcro wrist strap. In addition to the wrist strap, the Contour is further secured to your hand with an elastic band that also helps keep the camera from shaking during freefall.
Shipping Weight: 6 oz. (170g).

The Cookie Contour Headgear Mount is a multi-use mount for your Contour camera. It now comes with the stopper. It has been designed to fit the side of the Cookie G3 or G2 headgear. It can also easily be attached to the Flatlock, Cookie Hand Mount, or any other flat surface. The design of this mount will allow for easy adjustment of the camera's angle. Comes complete with mounting hardware.
Shipping Weight: 4 oz. (110g).

Please note that you need to already have the No. L5727 Cookie Countour Headgear Mount to use this item.
The Cookie Contour Stopper fits the No. L5727 Cookie Contour Headgear Mount and stops your camera from sliding forward on the mount.
Shipping Weight: 2 oz. (60g)
 

The Revolve from Bonehead now offers a mounting solution for the Contour camera and standard side mounts. This consists of a plastic Derlin plate and machined aluminum rail. The rail will slide into the Contour camera rail guides and allows for visor rotation and level adjustments.
Shipping Weight: 4 oz. (110g).

The Rotating Flat Surface Mount is the ultimate in smart design and simplicity. This useful multi-purpose surface mount was developed to be easy to use, and give you the confidence that once locked, it will stay in place. Simply slip the camera onto the TRails, rotate the camera into position, push on the lock button, and you are good to go.
Shipping Weight: 4 oz. (110g).

The Profile Mount was built to place a fixed camera within millimeters of the surface that you apply it to. The low profile design enhances the already minute size of the Contour video camera making the World's Smallest HD Camera even more compact. Its 3M base adheres best to flat surfaces but will conform to curves of headgear and fairings for a variety of applications. Comes with one left side and one right side mount.

The Profile Mount was built to place a fixed camera within millimeters of the surface that you apply it to. The low profile design enhances the already minute size of the Contour video camera making the World's Smallest HD Camera even more compact. Its 3M base adheres best to flat surfaces but will conform to curves of headgear and fairings for a variety of applications. Comes with two right side mounts.

This powerful suction cup mount attaches to your Contour Video Camera to any windshield or car body. This meticulously designed mount makes it simple to turn, tilt, and rotate your camera 360 degrees. Suction pad advised for windshields and flat (non-porous) surfaces.

The Contour Picatinny Mount mounts your Contour camera on tactical weapon platforms or other devices that use a standard MIL-STD-1913 Picatinny/Weaver rail. This mount is built tough with reinforced polymer; it resists vibration, recoil forces and heat but is also lightweight and easy to use. It mounts securely and easily to the rail via thumbscrew.
+ Securely mounts your Contour MIL-STD -1913 Picatinny/weaver rail
+ Easy on and off with the TRail system

The Roll Bar Mount was built to attach your Contour to motorsports roll-bars. Capture race, drift, and off-road action. Using a double socket arm and ball design it adjusts by turning a central wing nut that gives you almost infinite rotation to achieve perfect shooting angles. The marine grade aluminum mount attaches securely and easily via a bonanza strap to round bars from 2” to 3” in diameter.
+ Securely mounts your Contour to round surfaces from 2–3” in diameter
+ Marine grade aluminum that is strong and light
+ Easy on and off via the universal mount

The rechargeable lithium-ion battery provides 2-3 hours (depending upon usage and temperature) of portable power for your Contour cameras. To recharge, place the battery in your Contour camera and connect to your computer with the USB cable included with the camera.

The Lens Kit is a little TLC for your Contour Video Camera. It includes extra lens covers and a replacement lens ring. In addition to the replacement items the lens ring adaptor allows you to screw on a standard 37mm lens filter to get the perfect shot in the toughest lighting conditions.

Whether you're shooting Arizona Arsenal, a tandem, or military training, take charge with the HYPEYE D PRO Camcorder Indication and Control System. Made specifically for skydivers, the HYPEYE D PRO controls Sony camcorders through the D/AV half-moon interface. The HYPEYE D PRO provides features and functionality never before seen in any camcorder controller. Its super-bright, intuitive, three LED indication system keeps you informed of your camcorder's status even when facing the sun!
 

• Push button to power on/off & start/stop recording
• Toggle between record & playback modes
• Debrief jack for non-intrusive video viewing
• Push button protection against accidental activation
• Zoom Memory
• External audio sourcing
• Nylon threaded mounting hole
• Adjustable LED brightness

Shipping Weight 8 oz. (225g).

General Information:

This kit was designed for the videographer who wants the most tricked out camera headgear around. It can also be used for custom camcorder setups for any application.
Allows users to:
 

• While recording, capture still pictures onto your camcorder by using an external switch. (Standard 2.5mm bite or tongue switch will work). Photo features require compatible camcorder and external switch.
• Use your camcorder as a dedicated still camera. Photo features require compatible camcorder and external switch.
• Interface to L&B Optima audible for visual warning indication. It will only couple with No. I10501 Optima II With LED Connection Port, or original Optima audible altimeters with the LED already built in.
• Custom push button interface. Enables control of the camcorder via the user’s own push button. (Push button supplied by user).
• Includes the No. L2433 Hypeye D Pro Photo Kit.
• Includes the No. L12432 Hypeye D Pro Debrief Cable.

Shipping Weight: 8 oz. (225g).

General Information:

This cable allows you to debrief through the HYPEYE D PRO without dismounting your camcorder. You can easily plug this cable into your HYPEYE D PRO and then into a TV for quick viewing of the last jump. It's a must for teams in training. This cable comes as part of the No. L12431 HYPEYE D PRO EXPANSION KIT.
Shipping Weight: 6 oz. (170g).

The HyPeye D Mini is a AV/R 90 degree (half moon/ 'D') connector port video camera indicator. It is the same as the HyPeye except that it has a different plug. It is similar to the CamEye II in that it shows the status of your video camera with LED lights, but it does not have a control switch. The reason people choose the HyPeye D Mini is if they are looking for a camera indicator but do not require an external control switch. A switch can break, adds more items to your headgear and sometimes requires drilling another hole in your headgear to cleanly house it. The HyPeye D Mini is plugged into your camera's AV/R (half moon/ 'D') port and can be easily mounted to your eye sight with the enclosed zip ties, or it can used without an eye sight since the LED's are so bright. The HyPeye D Mini will display a Blue, Red, or Yellow light depending upon the status of your camera. Most Sony Camcorders will work with the HyPeye D Mini that have a AV/R (half moon/ 'D') port. Manufacturers other than Sony are not tested however the HyPeye D Mini may work with their remote jack. The display is 0.3" x 0.7" (8mm x 18mm). The cable is 21" (53cm) long.
Shipping Weight: 6 oz. (170g).

General Information:

The HyPeye Mini is an LANC port video camera indicator. It is similar to the CamEye II in that it shows the status of your video camera with LED lights, but it does not have a control switch. The reason people choose the HyPeye Mini is if they are looking for a camera indicator but do not require an external control switch. A switch can break, adds more items to your headgear and sometimes requires drilling another hole in your headgear to cleanly house it. The HyPeye Mini is plugged into your camera's LANC port and can be easily mounted to your eye sight with the enclosed zip ties, or it can used without an eye sight since the LED's are so bright. The HyPeye Mini will display a Blue, Red, or Yellow light depending upon the status of your camera. Most Sony Camcorders will work with the HyPeye Mini that have a LANC/Remote jack. Manufacturers other than Sony are not tested however the HyPeye Mini may work with their remote jack. The display is 0.3" x 0.7" (8mm x 18mm). The cable is 30" (76cm) long.
Shipping Weight: 6 oz. (170g).

General Information:

2.5mm plug. Stereo Plug Only. Now a compact, low profile, hands free operation for your still camera. New features include: the introduction of a 90 degree bend at the wire to switch junction, a wider switch for more comfortable and reliable operation, thicker/more durable/more resilient metal contacts, a clearly marked "Bite Zone" to demarcate the proper area to bite, and high temperature thermoplastic and epoxy for better heat resistance. It's now easier to use and much more tolerant of misuse. This switch fits comfortably in your mouth, is extremely easy to use, and will take one or multiple exposures. They're perfect for freeflyers and anyone wanting hands-free photography without jumpsuit circuitry. The Bite Switch works best with open-faced headgear. Individually tested and guaranteed to function for thousands of shots. The design has been tested up to 3000 bites without a malfunction, and none have failed in the field when used properly. The Conceptus Bite Switch is ready-to-use with most Canon cameras and can be adapted to almost any camera with a remote shutter release jack. It's easy to connect and disconnect from your camera, and can be easily spit out at the end of the dive or if you need to cut away your headgear. It measures 23" long, switch body is 1/4" diameter. Shipping Weight: 4 oz. (110g).

Digital plug. For Canon: D30, D60, 10D, 20D, 30D, 5D, D1, D1 Mark II, Ds1, and Ds1 Mark II as well as other Canon cameras using this type of digital plug.
Now a compact, low profile, hands free operation for your still camera. New features include: the introduction of a 90 degree bend at the wire to switch junction, a wider switch for more comfortable and reliable operation, thicker/more durable/more resilient metal contacts, a clearly marked "Bite Zone" to demarcate the proper area to bite, and high temperature thermoplastic and epoxy for better heat resistance. It's now easier to use and much more tolerant of misuse. This switch fits comfortably in your mouth, is extremely easy to use, and will take one or multiple exposures. They're perfect for freeflyers and anyone wanting hands-free photography without jumpsuit circuitry. The Bite Switch works best with open-faced headgear. Individually tested and guaranteed to function for thousands of shots. The design has been tested up to 3000 bites without a malfunction, and none have failed in the field when used properly. The Conceptus Bite Switch is ready-to-use with most Canon cameras and can be adapted to almost any camera with a remote shutter release jack. It's easy to connect and disconnect from your camera, and can be easily spit out at the end of the dive or if you need to cut away your headgear. It measures 23" long, switch body is 1/4" diameter. Shipping Weight: 4 oz. (110g).

2.5mm plug. Stereo Plug Only. Similar to the Bite Switch except this is controlled by your tongue. The Tongue Switch works with even the tightest full-face headgear and chin cups, and requires no jaw movement or blowing. It is operated by a movement similar to pressing your tongue against the front teeth. It measures 23" long, switch body is 1/2" wide.
Shipping Weight: 4 oz. (110g).

Digital plug. For Canon: D30, D60, 10D, 20D, 30D, 5D, D1, D1 Mark II, Ds1, and Ds1 Mark II as well as other Canon cameras using this type of digital plug.
Similar to the Bite Switch except this is controlled by your tongue. The Tongue Switch works with even the tightest full-face headgear and chin cups, and requires no jaw movement or blowing. It is operated by a movement similar to pressing your tongue against the front teeth. It measures 23" long, switch body is 1/2" wide.
Shipping Weight: 4 oz. (110g).
 

The Pro Mouth Switch is a new still camera mouth switch. This switch features a very low profile end which is very comfortable in your mouth.
For: Canon Digital Rebel 300D, Canon Digital Rebel XT 350D, Canon Rebel film cameras, and any other cameras using a 2.5mm plug.
Recommended use: Place the PRO Mouth Switch between your tongue and the roof of your mouth, and then press it. Biting it with your teeth is not recommended as it can damage the Pro Mouth Switch. Length is 32" (81cm).
Shipping Weight: 6 oz. (170g).

The Pro Mouth Switch is a new still camera mouth switch. This switch features a very low profile end which is very comfortable in your mouth.
For Canon: D30, D60, 10D, 20D, 30D, 5D, D1, D1 Mark II, Ds1, and Ds1 Mark II as well as other Canon cameras using this type of digital plug.
Recommended use: Place the PRO Mouth Switch between your tongue and the roof of your mouth, and then press it. Biting it with your teeth is not recommended as it can damage the Pro Mouth Switch. Length is 32" (81cm).
Important: This model of the Pro Mouth Switch is configured for fast action photography. If you’re using AUTO FOCUS make sure your focusing mode is set to AL SERVO for proper functioning (If the Pro Mouth Switch is plugged into your camera it should start focusing as soon as the power is turned on). O: AE/AF AE lock This setting can be found at: Menu -> Custom Functions -> Shutter button/EA lock button.
Shipping Weight: 6 oz. (170g).

This switch is an easy way to trigger your 35mm camera. The push button is water tight and is easily triggered by biting down or depressing the button with your tongue. Your camera must accept a remote shutter release and you must have the wire plug-in to fit your particular camera. The switch has two leads and is simple to splice to into most 35mm camera electronic remote shutter releases. The kit includes switch and installation instructions. Bite switch head measures 1.5" X .75" X .25". Shipping Weight: 6 oz. (170g).

Trigger your 35mm camera's shutter hands-free with this mouth-activated remote shutter release. Short puffs into the hose fire off single shots while a constant blowing pressure will yield continuous shooting. To use the Blow Switch your camera must accept a remote shutter release and you must have the wire plug-in to fit your particular camera. To install simply cut your shutter release's button off and solder the two wires that trip your camera's shutter to the two terminals on the Blow Switch micro-switch. The kit includes the micro-switch/diaphragm unit, pressure hosing and installation instructions. Shipping Weight: 6 oz. (170g).

The Zkull3N insert is an additional adapter piece, useful when different types of cameras or mounts are used. Cameras can be swapped within seconds. The Zkulls3N inserts are made from the same aluminum as the base ring of the system.
    This insert will fit the Zkulls3N only. It will not fit the original Zkulls™.
Shipping Weight: 6 oz. (170g).

The Zkulls™ insert is an additional adapter piece, useful when different types of cameras or mounts are used. Cameras can be swapped within seconds. The Zkulls™ inserts are made from the same coated aluminum as the base ring of the system.
    The Zkulls™ insert will fit the original Zkulls™ only, it will not fit the Zkulls3N.
Shipping Weight: 6 oz. (170g).

The Zkulls™ Anti Twist Kit helps fix the heading of your video camera. The kit includes the anti twist plate, a camera finger screw, and a secure pin which is coupled with Zkulls or Insert For Zkulls (sold separately). This helps to avoid unwanted twists of the video camera position. No tools or additional holes needed for installation.
Shipping Weight 8 oz. (225g).
 

The use of GoPro HERO and HERO 2 cameras in skydiving has become very popular. Mounting these cameras safely for the use in skydiving is not always easy. 
Like the Zkulls Hero Overkill, the Zkulls Hero Overkill PRO mounts the GoPro to the forehead and either video or still camera to the top of the headgear.
The Zkulls Hero Overkill PRO bracket allows you to quickly connect and disconnect the GoPro HERO or HERO2 to the forehead section of your headgear. This mount gives you maximum flexibility for the combined mounting of a video or stills camera with a GoPro HERO and HERO 2.
You can remove the entire GoPro mount from your headgear within a couple of seconds using the integrated Zkulls 3N attachment system, as well as easily remove the GoPro from the front of the bracket. Since the GoPro is mounted at the forehead section of the headgear, it is not vertically exposed like it would be with the original mounting foot. Additionally the GoPro is secured by 2 bungee straps.
The Zkulls Hero Overkill PRO comes with a solid Velcro strap to hold still cameras on heading and is an anti twist solution. The Zkulls Hero Overkill PRO also comes with an anti twist pin for video cameras.
Dimension of top plate: 6.3" x 2.3" (16cm x 6cm).
Shipping Weight: 1 lb. (455g).

The Zkulls GoPro Twin Plate is for attaching two GoPro to the front forehead of your headgear. You will need to have a heagear with a flat front in order to mount this to directly.
The Zkulls GoPro Twin Plate can also be used in conjunction with the No. L5824 Zkulls Hero Overkill PRO. To use the Zkulls GoPro Twin Plate with the Zkulls Hero Overkill PRO you will need to purchase a No. L5806 Zkulls3N Additional Insert. This configuation will allow you to remove the entire Zkulls GoPro Twin Plate from your headgear within a couple of seconds and switch it back to the single GoPro bracket of the Zkulls Hero Overkill PRO. Additionally the GoPro are secured by a bungee strap.
Shipping Weight: 1 lb. (455g).
 

This is a double secured GoPro Hero mount. Simply by flipping the GoPro forward you can easily open the camera housing without unscrewing.
You can also add an additional stills or video camera to the top of the bracket. The Anti Twist pin for the video camera and anti twist strap for the still camera is included.
Dimension of top plate: 6.3" x 2.3" (16cm x 6cm).
Shipping Weight: 1 lb. (455g).

The Zkulls™ Stills Base Plate is a mounting plate for still cameras. It has a Velcro strap to fix the camera heading. It also incorporates a channel to route a tongue or bite switch cable underneath the camera body and into your headgear. It is meant to be coupled with Zkulls (sold separately) but can be mounted directly to headgear. There are slots on the base to allow fine adjustment of the camera's heading, left or right.
Fits: Canon EOS D350, D400, D450, D500, D550, D1000, Rebel XT, XTI, XSI, XS, Nikon D40, D50, D60, and similar camera bodies.
Fits: Canon 5/7D and similar camera bodies.
Shipping Weight: 1 lb. (455g).

The Zkulls™ Stills Switch Bracket is ideal for wanting to switch between panoramic and vertical pictures. The bracket can be mounted horizontally or vertically on top of your headgear, as well as vertically side mounted. It is meant to be coupled with Zkulls (sold separately) but can be mounted directly to headgear. If you plan on quickly switching from horizontal to vertical shooting, then an additional Zkull Insert is recommended. There are slots on the base to allow fine adjustment of the camera's heading, left or right.
Fits: Canon EOS D350, D400, D450, D500, D550, D1000, Rebel XT, XTI, XSI, XS, Nikon D40, D50, D60, and similar camera bodies.
Fits: Canon 5/7D and similar camera bodies.
Shipping Weight: 1 lb. (455g).

The Zkulls™ Dual Mounting System is a top mount video platform with front mount bracket for stills. The front mount is connected with Zkulls (Included), which can be easily put on or taken off. The plate slides backwards and forwards to easily fit Zkulls equipped headgear. This is for camera flyers who prefer a top mount setup. It is meant to be coupled with Zkulls (sold separately) but can be mounted directly to headgear.
Shipping Weight: 1 lb. (455g).

The Zkulls™ CX Cage Bracket is a C shaped cage bracket that fits Sony cameras. Although this is meant to be used as a top mount, it can be used as a side mount as well. The camera can be switched upside down for freefly coaching and competition. For wingsuit flyers, the camera can be switched 90 degrees. It is meant to be coupled with Zkulls (sold separately) but can be mounted directly to headgear. If you plan on quickly switching from horizontal, to 90 degree, to upside down filming, then an additional one or two Zkull Insert is recommended.
Shipping Weight: 1 lb. (455g).

This is the new Schumacher precision machine quick release bracket. It has a number of new features not previously available on other quick release brackets. For starters this bracket is extremely light, weighing in at just over 3 oz, and very compact. It measures 3 1/2" x 2" x 5/16" (8.9cm x 5.1cm x 0.8cm). The camera plate has beveled edges so that you can easily slide your camera plate in and out. The beveled edges also have a secondary benefit which is that it will depress the pin when sliding in the camera plate. You can use just one hand to install it, there is no need to have to pull on the pin while sliding in the camera plate. An audible click will tell you the camera plate is secure. Can be used for video or still cameras. Comes complete with black anodized base plate, camera plate, camera Allen screw, Allen wrench, no skid camera grip surface and base plate flush-mounting hardware. Measures 3 1/2" x 2" x 5/16" (8.9cm x 5.1cm x 0.8cm). Shipping Weight: 8 oz. (225g).

This is an extra camera plate used in conjunction with the No. L1369 Schumacher Quick Shoe Camera Mount. If you switch between several cameras and do not want to always have to switch the camera plate to each camera, then one of these will be needed.
Shipping Weight: 4 oz. (110g).

With this Camera Quick Release you can mount and dismount your camera faster than ever! Compact, low-profile quick release that easily docks and locks your camera or bracket. Instead of having to always get out the screwdriver to release your camera you can now do it with the push of a button. The quick release base unit will mount to your headgear and the mounting plate will mount to your camera. When pressed together they then lock in place. This quick release has been rated for equipment weighing 6.5 lbs or less. This should include 35mm and medium format cameras (Excluding those with extremely long telephoto lenses attached), and 8mm or similar format cameras. Net Weight 5.5 oz. Dimensions: 3 1/2" L x 2" W x 1/2" D.
Shipping Weight 8 oz. (220g).

This is an extra camera plate used in conjunction with the No. L12485 Camera Quick Release. If you switch between several cameras and do not want to always have to switch the base plate to each camera, then one of these will be needed.
Shipping Weight: 4 oz. (110g).

The GOLDMEMBER is a precision machined aluminum camera quick release bracket that will easily mount to any surface you would normally attach a camera to. With a simple pull of the locking piston ring, the center of the GOLDMEMBER slides out making it quick and easy...YET SECURE... to add and remove cameras (video and/or still cameras) whenever you want. Low profile pull-ring is small and not easily disengaged until you want it to! Small, simple and rock solid, the new GOLDMEMBER is a powerful addition to any camera flyer's arsenal of equipment. Comes complete with hard gold anodized Base Plate, Camera Plate, Camera Allen Screw, no skid camera grip surface and base plate flush-mounting hardware. Additional Goldmember camera plates can be purchased so switching between cameras is quick and easy. Dimensions: 2" L X 3.5" W X 0.5" D.
Shipping Weight: 8 oz. (225g).

This is the extra camera plate for the Goldmember. You can purchase multiple camera plates in order to attach to multiple cameras, video and still, so that when you want to switch cameras on the Goldmember base plate it's as simple as sliding one camera out, and another right in.
Shipping Weight: 8 oz. (225g).

Although a smaller mounting platform, this is the only mount that gives you the ability to direct your camera in 4 directions. The mounting plate has a notch on each of the four sides for easy rotation. Whether you are flying your canopy in formation or flying a wingsuit you can direct your camera in the right direction with the Sky Systems QUICK QUAD CAMERA MOUNT. Dimensions: 2.25" L x 2.5" W x 0.37" D.
Shipping weight: 8 oz. (225g).
 

This is the extra camera plate for the Quick Quad. You can purchase multiple camera plates in order to attach to multiple cameras, video and still, so that when you want to switch cameras on the Quick Quad base plate it's as simple as sliding one camera out, and another right in.
Shipping Weight: 8 oz. (225g).

The Liquid Flatlock is a low profile camera quick release. The Flatlock will fit to any flat surface and is ideal to mount cameras to the top or side of any headgear. The Flatlock comes complete with all fasteners needed to mount to your headgear's flat surface, as well as one camera screw and hex key. If you're looking for a rigid, low profile quick release then the Flatlock is the one for you. Dimensions: 3.9" L X 3" W X 0.3" (100mm L X 75mm W X 8mm D).
Shipping Weight: 8 oz. (225g).

This is the replacement plate for Liquid Flatlocks manufactured after June 2009. It will not work with Liquid Flatlocks manufactured before June 2009.
This is an extra camera plate used in conjunction with the No. L5735 Liquid Flatlock. If you switch between several cameras and do not want to always have to switch the camera plate to each camera, then one of these will be needed.
Shipping Weight: 4 oz. (110g).
 

The Flatlock Adapter allows you to mount the No. L5735 Liquid Flatlock to any of the Cookie range of headgears. The adapter is made of molded polyurathane and includes all the fasteners needed to mount to your headgear.
The MXV Small Flatlock Adapter will fit MXV sizes XS, Sm, Med.
The MXV Large Flatlock Adapter will fit MXV sizes Lg, XL, XXL.
The Rok Flatlock Adapter will fit all sizes of the Rok.
The GAS Flatlock Adapter will fit all sizes of the GAS.
The Ozone Flatlock Adapter will fit all sizes of the Ozone.
The Atomic Flatlock Adapter will fit all sizes of the Atomic.
 Shipping Weight: 8 oz. (225g).

This is the Padlock found on the Cookie Atomic headgear. It can be used as a replacement for your current Padlock or you can utilize it on another headgear with a flat side.
Measures: 3 1/2" x 3 1/2" (8.9cm x 8.9cm)
Shipping Weight 8 oz. (225g).

Plate Only. This is the replacement plate for the Cookie Padlock. If you change cameras periodically then you will most likely want an extra plate to mount your camera to.
Shipping Weight: 8 oz. (225g).

This universal top mount platform is used for mounting a video or still camera on top of your Mindwarp, or any other headgear with a curved top. Drilling and assembly of three mounting screws (screws included) is required. Cameras not included. 
Shipping Weight: 1 lb. (455g).

The altimount has been updated for 2007. It now has a 45' angle bend and is to be mounted on the right side mudflap for better viewing. The Alti-mount is a great solution for chest mounting a visual altimeter. The Alti-mount is a carbon fiber 'L' bracket that slip into the right ring cover or mudflaps on the front of your skydiving harness and with a Velcro strap lock in place so your altimeter is in the same place every time regardless of body position. Most importantly, the Alti-mount is designed not to interfere with the operation of the 3-ring release system or cutaway handles.
Shipping Weight: 1 lb. (455g).

CamEye II
Take Control of Your Camera

    Take control of your camera. The CamEye II is specially designed for skydivers but can be used in any situation where  it's difficult to reach the camera. With short clicks on the red button you can toggle in between Start and Standby Modes, to save tape.
    By holding the button down you can actually turn your camera OFF and back ON, saving battery life.
    Three different indication lights (Blue, and Red) will indicate the camera's status at all times.
    SONY and Canon camcorders with a LANC jack can be controlled via CamEye II. Other brands that also have LANC ports may also work with the CamEye II. The CamEye II is always tested on real camcorders.
    The CamEye II is not just a light. A microcomputer inside the CamEye II controls the camera and reads the status for you. CamEye II works in parallel with the normal control buttons on your camcorder. This means that you can still operate the camera the normal way. The LANC cord is 17.5" (45cm) long. The LED cord is 13" ( Shipping Weight: 6 oz. (170g).
Click Here for more information and on the CamEye II.

Click Here for a list of tested camcorders

The CamEye SPORT LANC remote control was designed for use in extreme sports together with a "bullet" type camera lens connected to your video recording device (video camera with AV in capability or video recording deck). It an be used in many sports outside of skydiving such as, bicycling, skiing and snowboarding, auto racing, motocross, motorcycle racing, paragliding, and windsurfing to name just a few. The CamEye SPORT can also control the recording device in CAMERA mode. The CamEye SPORT detects the recording device operation mode (VCR or CAMERA) and sets the correct control commands automatically. 
    The CamEye SPORT makes it easy to start and stop recording - great for saving valuable and expensive DV tapes - no more unnecessary film shots. A short click on the red button toggles between recording and standby. The feedback LED indicator shows the camera status and even tells you when it's time to replace the tape or recharge the battery. LANC cord is 3.3 feet (100cm) long.
    The CamEye Sport exists now in three versions. V1.4, V1.6 and V1.8.. We recommend V1.4 for Canon models and Sony's models with a power switch with unique positions for each mode "old fashion" (memory, camera, vcr, off, etc), V1.4 controls recording both in camera and in VTR mode. V1.6 is recommended for newer Sony's models which have a toggle mode selection power switch and it will only work in VTR mode, this model overrides the mode selector switch on the camcorder. With "toggle switch" we mean a switch that you need to push several times in order to toggle between the different modes (memory,camera, vcr, etc). V1.6 solves the issues with camcorders like SONY HC40 which has a "soft" mode selector switch. The mechanical switch for selecting the operation mode have been replaced on a number of newer camcorders (see list below) from Sony by a push button. By pressing the button repeatedly available operation modes is selected one by one each time the button is pushed. The selected mode is however not remembered when the camcorder is turned off so each time the camcorder is turned ON it starts from CAMERA mode and the user has to select the desired user mode (MEMORY / PHOTO / VTR etc.) even if it was used in VTR (PLAYER) mode before being turned OFF. CamEye SPORT (version 1.4 or earlier) will therefore not function as intended if the camcorder is turned OFF and in VTR (PLAYER) mode. Each time the camcorder is turned ON, either by the switch on the camcorder or via CamEye SPORT, it will start up in CAMERA mode and the user have to put the camcorder in VTR (PLAYER) mode manually. CamEye SPORT (version 1.4 or earlier) works in CAMERA mode also so the user can be fooled to believe that the camcorder is in VTR mode and recording when it’s recording in CAMERA mode.
Models affected by this issue:
The list below is based upon currently known models which have AV in and LANC functionality from Sony. The list might be extended to future models if released after the publication of this bulletin. 
DCR-HC30, DCR-HC40, DCR-HC65, DCR-HC85, DCR-HC96E
DCR-IP210, DCR-IP220, DCR-IP45, DCR-IP55
DCR-PC108, DCR-PC109, DCR-PC330, DCR-PC350, DCR-PC1000E
HDR-HC1
Recommendation: We do not recommend the sale of CamEye SPORT version 1.4 or earlier to user of the above camcorders.
The new version is called CamEye SPORT V1.8 and it will only be compatible with Sony DVD and Hard Disk equipped camcorders with AV in capabilities. Tape based camcorders will not be compatible with this remote. V1.8 powers up Sony DVD and Hard Disk camcorders in the 'rec ctrl' mode where AV-in recording is controlled. DVD and Hard disk camcorders do not have the same capability to start recording in VCR mode directly from play mode like camcorders, using tape as recording media, have.

Unless otherwise specified, V1.4 will be shipped.
Shipping Weight: 6 oz. (170g).
Click Here for more information and on the CamEye Sport

Click Here for a list of tested camcorders

The Ops Drops are an Anti-Fog and Lens cleaner used by the U.S. Armed Forces typically in more dry environments. It can be used with any goggle, glass lens or plastic lens, Headgear Visors, Face Shields, Night Vision Goggles, Binoculars, Chemical & Gas Masks, Scopes, Dive Masks and Sunglasses. Recommended for use with Oxygn, Factory Diver and Flip-Up Factory Diver lenses. We have found it to be very effective on the Sorz, Kroops, Sky Eyes, and Ultimate Sports goggles. New goggles with a treated anti-fog lens tend to show little or no anti-fog difference with the Ops Drops applied. The Ops Drops come with a soft lens cleaning cloth that will help clean your goggle or lens without scratching. Make sure to rinse off your goggle or lens in water first, to help remove any fine dust, dirt, or sand that could possible scratch your goggle or lens when cleaning it. Will not harm surrounding silicone or rubber support frames. Not recommended for swim goggles.
 Shipping Weight 8 oz. (225g).

Long lasting, high performance, Xtreme Antifog concentrated paste compound, used to clean and polish plastics and glass as well as eliminate fog on visors. It's the one and only Xteme Antifog, and the science is simple. Reduce surface tension and you stop the fog before it starts. The latest in micro polymerization technology has fused together the longest lasting surface tension reducing agents with a powerful antistatic formula.
Can be used with Oxygn, Factory Diver, and Flip-up Factory Diver lenses, but not recommended.
Shipping Weight: 8 oz. (225g).

This specially designed camera mount allows the most popular PC style cameras to be installed on the side of headgear. The holder is adjustable in height, and has preset holes at the bottom to accept differently placed thumb screws (thumb screw not included), as well as padding to avoid damages to the body of the camera. The metal and padding of this mount helps protect the camera from the top, bottom, and outside facing side of the camera, which not all side mounts do. Installation is required and usually involves the drilling of three holes. 3" W x 3 1/4" to 5 3/4" H x 2" D. Camera not included.
Shipping Weight: 1 lb. (455g).

As the name suggests, it truly is "The bracket" for all of your camera needs. Whether you want to mount a still camera on the front of your Vapor, side mount a video camera on an Nvertigo, or even use it to mount a vertical still camera on top, this is the only bracket you'll ever need. Comes with most of the necessary hardware for a variety of options.  3" W x 3 1/2" H x 2 1/2" D (76mm x 89mm x 63mm).
Shipping Weight: 1 lb. (455g).

    Design Features:

• Anodized aluminum bracket is strong yet lightweight.
• Includes mounting hardware for several applications.
• Camera thumb screw included.
• Strap provided or extra security.
• Some drilling may be required.

    Uses:

• Front mount still camera.
• Side mount video camera.
• Top mount vertical still camera.
• Can be used for other applications.

Sale Price - Limited Quantities Available
The camera condom is a protective neoprene cover that fits your video camera like a glove. They are easy to put on and are designed to help protect the camera from dust, condensation, cold weather, lens fog, and damage from riser slap and abrasion. The thermal properties of neoprene insulate your camera from rapid temperature changes which cause condensation, cold weather shutdown, and lens fog. The camera condom is form fitting and eliminates the need for a bulky or non-aerodynamic rigid closure. Please note that the camera condom does not provide any protection against impact such as a rigid enclosure does.
Sony PC Camera Options:
PC 1/3, PC 4/5/8, PC 7/10/100, PC 6/9/101, PC 103/105/106, PC 109, PC 110, PC 115/120, PC 330, PC 350
HC 20/21/30/32/40/42
HC 90/96
CX 100
Sony TRV Camera Options:
TRV 18/25/27/38/39/70/80.
JVC Camera Options:
JVC GR-DVM 50U/70U/80U/90U.
Shipping Weight: 1 lb. (455g).

Please Note: The 'A' length DOES NOT include the dimensions for the camera lens, battery and or viewfinder. It is only the length of the camera body from front to back.

Sale Price - Limited Quantities Available
The Bonehead carbon fiber D-Box is meant for mounting and protecting newer Sony handycams to the side or top of headgear. The new box design features a camera entry from the top where your camera then slides down into the box. A hard carbon fiber hinged top then closes over the top of the camera and is held in place by plastic cable which threads through the aluminum hinges, similar to a door hinge. An extra piece of foam with adhesive backing comes with the box to help shim the camera in place and prevent shaking. These D-Boxes can mounted to any headgear with a flat side or top surface, depending on the box. Power buttons at the rear of the camera are accessible when inside the box. Installation is required and usually involves the drilling of two or three holes. These D-Boxes are camera specific to either the Sony HC, IP PC, or TRV style cameras. Some non-Sony cameras will fit these boxes. Shipping Weight: 2 lbs. (900g).

Cookie BlackBoxes are designed to specifically fit Sony cameras. These boxes come complete with stainless steel mounting screws and an aluminum retaining screw. Cookie BlackBoxes are designed to have only just enough room for your camera. This gives you the most compact and best fitting camera box available. Depending on the box, the BlackBox will fit any flat side or flat top camera headgear, check the table below. The TG1/TG3 box and TG5/7 box will fit wide angle lenses with a 30mm thread size. The wide angle lens screws the the box itself.

Sale Price - Limited Quantities Available Cookie BlackBoxes are designed to specifically fit Sony cameras. These boxes come complete with stainless steel mounting screws and an aluminum retaining screw. Cookie BlackBoxes are designed to have only just enough room for your camera. This gives you the most compact and best fitting camera box available. Depending on the box, the BlackBox will fit any flat side or flat top camera headgear, check the table below. The TG1/TG3 box and TG5/7 box will fit wide angle lenses with a 30mm thread size. The wide angle lens screws the the box itself.

Sale Price - Limited Quantities Available
The X-JAKET family has grown to include the latest camera style and sizes!
We are continually working on expanding and updating the X-JAKET family as new and improved camera become available.
The X-JAKET is designed to attach to most headgear! It is easy to install and easy to remove.
Shipping Weight: 1 lb. (455g).

This Bonehead side mount "L" bracket is used for mounting the newer style digital video cameras. It will fit any Mindwarp or any other headgear with a flat side for mounting. The 'L' Bracket can be mounted right-side up or upside-down for inverted filming. Horizontal and vertical straps in addition to the camera screw hold the camera in place. Drilling and assembly of two mounting screws (screws included) is required. 3 1/2" W x 2 1/4" H x 2 1/4" D, inside diameter. Camera not included.
Shipping Weight: 1 lb. (455g).

A new and very comfortable chin cup. This molded chin cup design comes with two easy to use locking mechanisms on either side of the cup for easy adjustment. Wing nuts on the end of each adjustable plastic strap are for attaching to most open faced headgear.
Shipping Weight: 8 oz. (225g).

This chin cup is Bonehead's newest incarnation and is the one found on the Optik 210. This new chin cup design conceals the ladder straps inside for sleeker look and less snag potential!! Features removable padding for easy replacement or washing. It can be easily added to the Pimp Daddy or most other open face headgear. It comes with nut and bolt mounting hardware.
Shipping Weight: 8 oz. (225g).

This Sky Systems Sky Cup can be easily added to the Hurricane, Nvertigo X, or most other open face headgear. The padded chin cup has a black finish and is adjusted with the Alligator Snaps on the sides of the cup. It comes with nut and bolt mounting hardware.
Shipping Weight: 8 oz. (225g).

This is the newest incarnation of the Sky Systems Chin Cup. The Sky Cup II features a slightly larger design which helps to wrap around your chin more, making your headgear more secure. The ultra comfortable chin cup cradles your chin and the ladder straps hold it tight. The Sky Cup family works with most open face headgear. The padded chin cup has a black finish and is adjusted with the Alligator Snaps on the sides of the cup. It comes with nut and bolt mounting hardware.
Shipping Weight: 8 oz. (225g).

 

This easy to install rigid chin cup modification offers additional stability for the Velocity headgear. It is most popular when used with a Velocity equipped with one or two camera platforms. The unique ratcheting system makes it quick and easy to adjust the chin cup for a comfortable and secure fit. The kit comes complete with a rigid chin cup with a soft liner, attachment hardware, and mounting instructions.
Shipping Weight: 8 oz. (225g).

This kit allows for the quick release, cutaway, of your headgear. It works with the Vapor and Vapor Narrow as well as with chin cups.
Shipping Weight: 8 oz. (225g).

This is Bonehead's chin cup cutaway system. It is meant for being able to quickly cutaway your headgear in case of an emergency in the air or on the ground. Using this cut away system during freefall will most likely result in the loss of your headgear & camera equipment. This chin cup cutaway system can be used in conjunction with the Bonehead Chin Cup, as well as most other chin cups. The kit includes a cotter pin, cutaway loop, spring, washers, and Velcro. Installation is straightforward. Instructions included.

Vertical Orientation	Diagonal Orientation

1/4" ringsight. A new camera sight that offers versatility and durability. This sight's polarized optics are covered with glass, allowing you to use a t-shirt or other soft cotton cloth to clean the surface of your sight without fear of scratching the optics.  
These sights also have a threaded retaining ring and rubber o-ring that keep the optics in place, yet allow you to change the orientation of the optics to suit your preference. The shaft also comes off to allow you to custom cut the shaft to size without endangering the optics. 
Please Note: This is a 1/4" ringsight and can only be used with 1/4" Swivel Clamps, No. L1361 Schumacher 1/4" Swivel Clamp, or No. L1237 Swivel Clamp and Mounting Post. Sold separately.
Shipping Weight: 6 oz. (170g).

Vertical Orientation	Diagonal Orientation

6mm ringsight. Same as No. L1235 except that this is a 6mm ringsight.
A new camera sight that offers versatility and durability. This sight's polarized optics are covered with glass, allowing you to use a t-shirt or other soft cotton cloth to clean the surface of your sight without fear of scratching the optics.  
These sights also have a threaded retaining ring and rubber o-ring that keep the optics in place, yet allow you to change the orientation of the optics to suit your preference. The shaft also comes off to allow you to custom cut the shaft to size without endangering the optics. 
Please Note: This is a 6mm ringsight and can only be used with 6mm Swivel Clamps, No. L1366 Schumacher 1/4" x 6mm Swivel Clamp, or No. LB1243 Holder For Ring Sight. Sold separately.
Shipping Weight: 6 oz. (170g).
 

1/4" ringsight. This genuine concentric rings Newton Sight offers the ultimate in precision camera sighting. The polarized, optical eyesight produces a special Newton interference pattern  (a bulls-eye effect) that enables you to aim your cameras, quickly and precisely at the  target. The genuine Newton Ring Sight ensures precision sighting while also helping to correct for camera/eyesight parallax.
Please Note: This is a 1/4" ringsight and can only be used with 1/4" Swivel Clamps, No. L1361 Schumacher 1/4" Swivel Clamp, or No. L1237 Swivel Clamp and Mounting Post. Sold separately.
Shipping Weight: 6 oz. (170g).

1/4" ringsight. This economy-priced polarizing eyesight, once aligned with your camera’s viewfinder, enables you to quickly aim the camera on target. The reflective Newton pattern ( a series  of hyperbola forming a cross pattern ) ensures that, no matter how the headgear may shift, you will always be able to point the camera at the target seen in the center of the cross.
Shipping Weight: 6 oz. (170g).

6mm ringsight. The Newton Sight is designed for easy mounting on any type of camera headgear. Its cross  sight deadcenter, once aligned with the camera viewfinder, enables you to aim the camera  precisely at the target. The special Newton interface pattern ensures that no matter how the headgear may move, you will always be able to point the camera at the target seen in the Deadcenter of the cross. Without holder. (Picture to the right shows the Schumacher Articulating Ring Sight Bracket, Schumacher 6mm Swivel Clamp, and No. LB1234 Newton Cross Sight 6mm. Sold separately.)
Shipping Weight: 8 oz. (225g).

1/4" ringsight, Swivel Clamp, and Mounting Post. An easy-to-use transparent amber sight with center-spot to make centering your subject simple while at the same time causing no visual obstruction. This eyesight assembly comes standard on all Para-Mount Camera Systems. Eyesight assembly is simple to install and includes eyesight, adjustable swivel clamp, mounting post with attachment hardware and instructions for easy mounting to your headgear. Shipping Weight: 6 oz. (170g).

1/4" ringsight bracket. Same as No. L1365 Shumacher Articulating Ring Sight Bracket, except that this one is removable from its base with the simple loosening of its thumb screw. For those camera flyers who would like to quickly take off their sight for any reason, and have the added advantage to not have to realign the sight once it is put back on, then this is for you. After loosening the thumb screw, the top part of the bracket slides off leaving only the low profile base still attached to your headgear. You can then put the top part of the base with the shaft, swivel clamp, and ring sight still attached together in a safe place for later use. It could not be quicker or easier than this.
This bracket was also made to solve the problem of freefly headgear having no forehead area. The problem is that in order to mount a ring sight, you must place it too far away from your eye in order to avoid jamming it into your eye while putting the headgear on. This makes it hard to use a sight and the metal juts so far out that it is a safety hazard. The articulating clamp allows you to mount a post that is spring  loaded and rotates 90 degrees to allow you to move the sight out of the way and  put the headgear on. Then rotate the shaft to move the sight  back into place. The three contoured feet assures a tight fit on the curved headgear.  Once you have installed the bracket on the headgear and have tested the sighting and fit, you can cut off the extra length of the shaft. Kit comes with three Allen head mounting screws, Allen wrench, and articulating bracket.  It's the perfect way to add a ring sight to most of today's freefly headgear.  The sight mounts to this bracket with a normal swivel clamp. (Picture to the right shows the Schumacher Articulating Ring Sight Bracket, Schumacher Swivel Clamp, and Brent's Cross Sight. Sold separately.)
Please Note: This is a 1/4" ringsight bracket and can only be used with 1/4" Swivel Clamps, No. L1361 Schumacher 1/4" Swivel Clamp, or No. L1366 Schumacher 1/4" X 6mm Swivel Clamp (This Swivel Clamp is only used if you are coupling it with a 6mm ringsight). Sold separately.
Shipping Weight: 4 oz. (120g).

1/4" ringsight bracket. This bracket was made to solve the problem of freefly headgear having no forehead area. The problem is that in order to mount a ring sight, you must place it too far away from your eye in order to avoid jamming it into your eye while putting the headgear on. This makes it hard to use a sight and the metal juts so far out that it is a safety hazard. The articulating clamp allows you to mount a post that is spring  loaded and rotates 90 degrees to allow you to move the sight out of the way and  put the headgear on. Then rotate the shaft to move the sight  back into place. The three contoured feet assures a tight fit on the curved headgear.  Once you have installed the bracket on the headgear and have tested the sighting and fit, you can cut off the extra length of the shaft. Kit comes with three Allen head mounting screws, Allen wrench, and articulating bracket.  It's the perfect way to add a ring sight to most of today's freefly headgear.  The sight mounts to this bracket with a normal swivel clamp. (Picture to the right shows the Schumacher Articulating Ring Sight Bracket, Schumacher Swivel Clamp, and Brent's Cross Sight. Sold separately.)
Please Note: This is a 1/4" ringsight bracket and can only be used with 1/4" Swivel Clamps, No. L1361 Schumacher 1/4" Swivel Clamp, or No. L1366 Schumacher 1/4" X 6mm Swivel Clamp (This Swivel Clamp is only used if you are coupling it with a 6mm ringsight). Sold separately.
Shipping Weight: 4 oz. (120g).

These quality swivel clamps were machined precisely to hold a ring sight in place. Most machine shop clamps are made to hold gauges, etc. and can't take the high torque that your sight goes through with random bumps and knocks. This clamp has a semi circle binding ring that ensures maximum holding power. Because it is aluminum it will not rust. The new and improved design replaces the old knurled thumbwheel with a low profile Allen screw. This makes the clamp less likely to snag a line during an unstable deployment. The clamp comes with an Allen wrench for your toolkit. (Picture to the right shows the Schumacher Articulating Ring Sight Bracket, Schumacher Swivel Clamp, and Brent's Cross Sight. Sold separately.)
Please Note: This is a 1/4" Swivel Clamp and is meant to be used with any 1/4" ringsight and any 1/4" Mounting Post or No. L1365 Schumacher Articulating Ringsight Bracket. Sold separately.
Shipping Weight: 4 oz. (120g).

These quality swivel clamps were machined precisely to hold a ring sight in place. Most machine shop clamps are made to hold gauges, etc. and can't take the high torque that your sight goes through with random bumps and knocks. This clamp has a semi circle binding ring (see the arrow above) that ensures maximum holding power. Because it is aluminum it will not rust. The new and improved design replaces the old knurled thumbwheel with a low profile Allen screw. This makes the clamp less likely to snag a line during an unstable deployment. The clamp comes with an Allen wrench for your toolkit. (Picture to the right shows the Schumacher Articulating Ring Sight Bracket, Schumacher Swivel Clamp, and Brent's Cross Sight. Sold separately.)
Please Note: This is a 1/4" X 6mm Swivel Clamp and is meant to be used with any 6mm ringsight and any 1/4" Mounting Post or No. L1365 Schumacher Articulating Ringsight Bracket. Sold separately.
Shipping Weight: 4 oz. (120g).

This aluminum post is slightly longer than most hardware store posts, and milled to exact dimensions for precise fit. Because it is aluminum it will not rust.
Please Note: This is a 1/4" Mounting Post and can only be used with 1/4" Swivel Clamps, No. L1361 Schumacher 1/4" Swivel Clamp, or No. L1366 Schumacher 1/4" X 6mm Swivel Clamp (This Swivel Clamp is only used if you are coupling it with a 6mm ringsight). Sold separately.
Shipping Weight: 4 oz. (120g).

This aluminum post is slightly longer than most hardware store posts, and milled to exact dimensions for precise fit. Because it is aluminum it will not rust.
Please Note: This is a 6mm Mounting Post and can only be used with 6mm Swivel Clamps, or No. L1363 Schumacher 6mm Swivel Clamp. Sold separately.
Shipping Weight: 4 oz. (120g).

6mm Swivel Clamp and Mounting Post. Can only be used with 6mm ringsights, No. L1359 or No. LB1242. Sold separately.
Shipping Weight: 6 oz. (170g).

1/4" Swivel Clamp and Mounting Post. Can only be used with 1/4" ringsights, or No. L1360, No. L1235 and No. L1236.  Shipping Weight: 6 oz. (170g).

This is Bonehead's Flat-Top retrofit cutaway system. It is meant for being able to quickly cutaway your headgear in case of an emergency in the air or on the ground. Using this cut away system during freefall will most likely result in the loss of your headgear & camera equipment. This Flat-Top retrofit cutaway system can be used in conjunction with the Flat-Top Pro and Flat-Top Narrow headgear. The retrofit cutaway system consists of new hardware for your back latch, and a loop cutaway cable.

The aluminum Shark Fin is used for taking vertical still pictures with your camera. It is intended to be mounted to a flat top surface on your headgear. Three included screws are to be attached to the headgear. A separate foam pad for friction is included and is pictured attached to the aluminum Shark Fin here. An included camera tripod screw will then secure your camera to the aluminum Shark Fin. 3 3/4" W x 5 1/2" H x 1 1/2" D. Camera not included.
Shipping Weight: 1 lb. (455g).

This simple streamlined attachment with clear cover will allow you to mount a Pro-Dytter or Pro-Track to you Gath. It also allows easy access to the buttons. Comes with directions.
Shipping Weight: 1 lb. (455g).

Ever wonder how people captured these great images? Well here it is. This belly mount offers a unique point of view to any activity. Whether skydiving, snow-skiing, or doing many other activities, this fully adjustable mount can do the job. The Bel-Vue is constructed using a strong carbon fiber plate, firmly attached to a comfortable, adjustable body pad. The camera attaches to a unique, rugged mount that offers the user virtually every camera angle. Even multiple cameras are possible. So, if you are swooping, following behind, or filming yourself and want that unique camera angle, you'll need one of these! The Bel-Vue Plate measures: H 8"x W 10.5"  The camera mount extends outward 7.5".
Shipping Weight: 3 lbs. (1.36kg).

The Shu-Vue gives you a dynamic shot from the bottom of your sole. This camera mount is specifically designed to mount to your foot for great video and still shots. The camera attaches to a unique, rugged mount that offers the user virtually every camera angle. It utilizes a shorter version of the mount than on the Bel-Vue. The Shu-Vue also has a release system to quickly detach it from the user. It is supplied with an 'L' Bracket. Additional mounting hardware not included.
Shipping Weight: 2 lbs. (910g).

This side mount is designed for the Ion and Velocity headgear, however can be mounted to other headgear. The easy to attach, camera-ready video platform is designed to fit the newer Mini-DV Sony video cameras such as the Sony PC 1, 3, 5, 7, 8, 9, 10, 100, 101, 110, 102 (but not limited to just these cameras) as well as JVC 3U & 5U digital cameras. A great feature of this video side mount is that it offers variable pitch. This allows adjustment of the video camera angle, up or down, anywhere from zero to 30 degrees in either direction. The mount can also be rotated 180 degrees allowing for inverted camera attachment. 3" W x 4 1/4" H x 2" D. Camera not included.
Shipping Weight: 12 oz. (340g).

This top mount platform (Pictured here between the Velocity headgear and camera) is used to attach either a still or video camera to the top of one's headgear. It requires that you drill two holes on the top of the headgear for mounting, and can be adjusted slightly fore or aft from its original mounting spot to obtain the proper angle. A simple finger twisting lock screw allows for easy access to the mounting plate of the camera, letting you easily mount and remove your camera. An adjustable strap for wrapping around the camera adds to stability. This top mount was made for the Velocity headgear, however will work with most other headgear with a curved top dome. It measures about 6 1/2" L x 3" W x 1 1/4 - 1 1/2" D. Camera not included.
Shipping Weight: 12 oz. (340g).

This self contained unit is designed to work with video cameras that are equipped with a 6-9 volt DC OUT jack (3/32") and external tally light. The device uses your video camera's battery as a power source. When the unit is installed properly and the video camera is powered up, a Green LED will illuminate. When the camera is recording, a Red LED will illuminate. The easy-to-see LED's glow brightly and can be seen throughout the skydive. The SkyLight 2 is easy to install and comes with mounting instructions and everything necessary to attach to your camera headgear.
Shipping Weight: 1 lb. (455g).

1" wide X 60 yards long. This high quality, matte-surface, coated cotton cloth tape provides maximum strength adhesion and yet does not leave a gummy residue on equipment.
Shipping Weight: 1 lb. (455g).