parachutes skydiving

Shipping Weight: 2 oz. (60g).
Quantity Price Discounts:
Price: 1 to 5 $2.50  6 to 19 $2.20  20 or more $1.85  100 or more $1.75

Shipping Weight: 2 oz. (60g).
Quantity Price Discounts:
Price: 1 to 5 $2.50  6 to 19 $2.20  20 or more $1.85  100 or more $1.75

This pin is sold separately for use in making custom ripcord assemblies. You need only to thread cable through the hole and fix in place with a swagging tool. (61C4304) MS70107. 
Shipping Weight: 2 oz. (60g).
Quantity Price Discounts:
Price: 1 to 5 $14.95  6 to 19 $13.40  20 to 99 $12.25  100 or more $11.15

This cable cutter, with its unique triangular jaws, never leaves a frayed end when it cuts. Because of the special shape of the blades, cables are not crushed, but cut progressively. A cable when crushed or deformed in cutting is difficult to use with fittings. This cutter requires less force to cut ripcord cable than a typical pair of side cutters, and provides a consistently better cut. This small single-hand cutter is compact, light and very easy to handle. Its quality and long life make it particularly suitable for manufacturing and repairs in all fields of industry and craft. Capacity of 3/16" and smaller diameter cable. Length 8". Weight 10 oz. This cutter is made from hardened steel blades and center bolt, pressed steel handles that are contoured with plastic covering which provides for a good grip.
Shipping Weight: 1 lb. (455g).

Placed under the ripcord pins it makes the pins slide easier. 
Shipping Weight: 1 oz. (28g).
Quantity Price Discounts:
Price: 1 to 5 $0.30  6 to 19 $0.25  20 or more $0.20

By inserting the hook in the size 0 grommet of the reserve container, and the ripcord cable in the slot of the pull check tool, you can check the pull force of the reserve ripcord without opening the container. This device does not work on the top pin of some pilot rigs where the angle of the pull is extreme.
Shipping Weight: 4 oz. (110g).

Used for Oval Sleeves in the range of cable sizes from 1/16" through 5/32". Tool length 20 inches. 
Shipping Weight: 6 lbs.

Sold by the yard. 1/8" diameter cable. It is a 1/16", 7 X 7 galvanized aircraft cable with yellow coating, making it 1/8" diameter.
Shipping Weight: 3 oz./yd. (85g).
Quantity Price Discounts:
Price per yard: 1 to 5 $2.00  6 to 19 $1.80  20 to 99 $1.60  100 or more $1.40

Sold by the 166 yard roll. 1/8" diameter cable. It is a 1/16", 7 X 7 galvanized aircraft cable with yellow coating, making it 1/8" diameter.
Shipping Weight: 9 lbs. (4.09kg).

Used with yellow three ring release cable to make cutaway handles or with black coated cable to make ripcords. 
Shipping Weight: 1/2 oz. (15g).
Quantity Price Discounts:
Price: 1 to 5 $0.80  6 to 19 $0.68  20 or more $0.56

Sold by the yard. 1/8" diameter cable. It is 1/16", 7 x 7 galvanized stiff cable with black coating, making it 1/8" diameter. 
Shipping Weight: 3 oz./yd. (85g).
Quantity Price Discounts:
Price per yard: 1 to 5 $2.00  6 to 19 $1.80  20 to 99 $1.60  100 or more $1.40

Sold by the 166 yard roll. 1/8" diameter cable. It is 1/16", 7 x 7 galvanized stiff cable with black coating, making it 1/8" diameter. 
Shipping Weight: 9 lbs. (4.09kg).

Sold by the yard. 3/32" (2.38mm) diameter cable. Tensile Strength: 920 lbs. (460kg). Stainless steel aircraft cable used in the manufacture of ripcord assemblies. 7 X 7 twisted construction. MIL-W-83420.  
Shipping Weight: 3 oz./yd. (85g).
Quantity Price Discounts:
Price per yard: 1 to 5 $2.10  6 to 19 $1.90  20 to 99 $1.70  100 to 499 $1.50  
500 or more $1.30

Sold by the 500 yard roll. 3/32" (2.38mm) diameter cable. Tensile Strength: 920 lbs. (460kg). Stainless steel aircraft cable used in the manufacture of ripcord assemblies. 7 X 7 twisted construction. MIL-W-83420.  
Shipping Weight: 32 lbs. (14.5kg)

Stainless steel ball with hole for 3/32" (2.38mm) diameter cable. Used with swaging machine in manufacture of ripcords. 
Shipping Weight: 1/2 oz. (15g).
Quantity Price Discounts:
Price: 1 to 5 $1.05  6 to 19 $0.85  20 or more $0.70

Stainless steel ball with hole for 3/32" (2.38mm) diameter cable. Used with swaging machine in manufacture of ripcords. 
Shipping Weight: 1/2 oz. (15g).
Quantity Price Discounts:
Price: 1 to 5 $1.60  6 to 19 $1.33  20 or more $1.12

Cadmium plated sleeve used with Nicopress swaging machine to swage 3/32" (2.38mm) diameter cable. Used on Para-Gear static line cables to make the loop in the cable. 
Shipping Weight: 1/2 oz. (15g).
Quantity Price Discounts:
Price: 1 to 5 $0.45  6 to 19 $0.38  20 or more $0.32

Sold by the yard. 5/32" diameter cable. It is a 3/32", 7 X 7 galvanized aircraft cable with a nylon coating, making it 5/32" diameter. Used to make static line pins and pinless ripcords. 
Shipping Weight: 3 oz. (85g).
Quantity Price Discounts:
Price per yard: 1 to 5 $2.50   6 to 19 $2.13   20 or more $1.75

Sold by the 166 yard roll. 5/32" diameter cable. It is a 3/32", 7 X 7 galvanized aircraft cable with a nylon coating, making it 5/32" diameter. Used to make static line pins and pinless ripcords. 
Shipping Weight: 15 lbs. (6.8kg).

Used on No. M5420 5/32" diameter clear nylon coated cable. 
Shipping Weight: 1/2 oz. (15g).
Quantity Price Discounts:
Price: 1 to 5 $1.05  6 to 19 $0.86  20 or more $0.68

This cable cutter, with its unique triangular jaws, never leaves a frayed end when it cuts. Because of the special shape of the blades, cables are not crushed, but cut progressively. A cable when crushed or deformed in cutting is difficult to use with fittings. This cutter requires less force to cut ripcord cable than a typical pair of side cutters, and provides a consistently better cut. This small single-hand cutter is compact, light and very easy to handle. Its quality and long life make it particularly suitable for manufacturing and repairs in all fields of industry and craft. Capacity of 3/16" and smaller diameter cable. Length 8". Weight 10 oz. This cutter is made from hardened steel blades and center bolt, pressed steel handles that are contoured with plastic covering which provides for a good grip.
Shipping Weight: 1 lb. (455g).