parachutes skydiving

Leather sack measures about 1 7/8" and comes with material needed to be sewn onto your existing pilot chute (Sewing is required). 
Shipping Weight: 8 oz. (225g).

Greatly reduces drag, produces smoother flight, gives the jumper more control, and eliminates canopy oscillations and surges. The 28" (71cm) pilot chute canopy is made of Zero-Porosity nylon and acid-free mesh.
Shipping Weight: 1 lb. (455g).

A fully collapsible 36" (91cm) hand deploy kill line pilot chute. U.S. Patent #4,399,969. Designed by Bill Gargano. After main canopy is out of the bag and opening, the pilot chute collapses totally eliminating drag. It is easy to use and pack. A seven foot bridle allows it to be used on most systems. Easy to reset and pack, but will NOT function unless reset. Requires sewing by a rigger for installation. (Warning! Read and follow all instructions). 
Shipping Weight: 1 lb. (455g).

This main pilot chute is 36" (91cm) in diameter. The canopy is ultra-low porosity ripstop. The underside is Marquisette Netting and attaches to a 8 ft. (2.4 meter) bridle. 
Shipping Weight: 1 lb. (455g).

Comes with Bridle Cord. 
Shipping Weight: 1 lb. (455g).

Used on Rear Of Legstrap (ROL). Comes with Bridle Cord. 
Shipping Weight: 1 lb. (455g).

Comes with Bridle Cord. 
Shipping Weight: 1 lb. (455g).

Comes with special Bridle Cord. 
Shipping Weight: 1 lb. (455g).

Comes with special Bridle Cord. 
Shipping Weight: 1 lb. (455g).

Comes with Bridle Cord. 
Shipping Weight: 1 lb. (455g).

Comes with Bridle Cord. 
Shipping Weight: 1 lb. (455g).

Comes with Bridle Cord. 
Shipping Weight: 1 lb. (455g).

Comes with Bridle Cord. 
Shipping Weight: 1 lb. (455g).

Comes with Bridle Cord. 
Shipping Weight: 1 lb. (455g).

Comes with Bridle Cord. 
Shipping Weight: 1 lb. (455g).

If you want to get it off your back, this large nonporous pilot chute gives you the ultimate in drag. This unit features a 36" (91cm) canopy and 36" (86cm) long spring which means it only has to stand up to reach the wind. It has a 6" (23cm) crown and a unique design. 
Shipping Weight: 2 lbs. (910g).

This Mini Grabber uses a 14" (36cm) MA-1 spring with a 6" top. The canopy and mesh portion, however, are identical to a regular grabber. This is the most compact spring-loaded pilot chute available - smaller and lighter than an MA-1. 
Shipping Weight: 2 lbs. (910g).

This high performance unit is a 36" (91cm) zero porosity pilot chute. The crown is 6" (15cm). The spring is 34" (86cm) in length. The spring end tapers in the center instead of the lower end. It is easy to compress into main or reserve. This feature also causes the base of the pilot chute to act as its own 6 1/2" (16cm) kicker plate. The 34" (86cm) spring places the pilot chute above the burble before it even leaves your back thereby eliminating pilot chute hesitations. 
Shipping Weight: 2 lbs. (910g).

Diameter = 36". Spring Length = 28". New style, design developed to inflate quickly at low airspeed. Wide mesh. F-111 fabric, soft top. Upper and lower tabs for pilot emergency rigs are attached.
Shipping Weight: 2 lbs. (910g).

This is a circular metal plate that gives the pilot chute spring a solid launching platform. Can be used with any spiral type pilot chute but is best suited for use with MA-1 pilot chutes in reserve or tandem back packs (prevents spring from burrowing into canopy). 53C6711.
Shipping Weight: 4 oz. (110g).