parachutes skydiving

T-10B, T-10C, T-10D Non-Steerable Troop Parachute Assembly

    All T-10C Canopy Assemblies are manufactured using the latest revision of material listed and new U.S. Army material color Camouflage Green #483 in Technical Data. All T-10C Canopy Assemblies are manufactured in strict accordance with Personnel Parachute U.S. Military Specifications MIL-DTL-6645, MIL-DTL-7567 and MIL-STD-849, latest revisions. All T-10C Canopy Assemblies are preserved, packaged and packed in accordance with U.S. Military Specifications or customer’s specific packaging instructions.  
    The T-10 extended skirt parachute was standardized by the U.S. Government as a troop personnel parachute in the early 1950’s, and has been used successfully since that time with relatively few modifications. The major change to the basic canopy was made in 1976 with the addition of anti-inversion netting to the skirt (old Part Number 11-1-1501 – T-10B).  This so improved the reliability of an already very dependable parachute that many canopies already in service were retrofitted with the netting. The T-10B Canopy was further improved to new version T-10C, Part Number 11-1-1501-2, in November, 1986, by increasing the Pocket Band free length from 4” to 7-1/2” and decreasing the Pocket depth from 5” to 4-1/4”.  This change reduced the opening shock by providing s slightly larger diameter at the skirt hem; providing a lower rate of descent and a “softer” landing.  All T-10B Canopies in service have now been upgraded to the new Pocket Band length.  All T-10C assemblies material color was changed to the new U.S. Army color Camouflage Green #483 in 1995. An additional change was made to the canopy in 2003 incorporating Fluorocarbon treated suspension and vent lines.  This treatment of the nylon cord, Type II, 400# tensile strength protects the cord from collecting dirt and grit from the drop zone and increases the service life of the canopy. The Pack Assembly P/N 62J4342 was revised in June 1995 by adding one (1) each Static Line Stow Bar to each side of present webbing loops used for stowing the Static Line.  These new Stow Bars are used for additional stows at the folded ends of 15’-5” yellow Static Line.
    When packed for service, the complete assembly weighs approximately 29 pounds.  The canopy has a nominal diameter of 35 feet and a projected or inflated diameter of 25.7 feet.
    The deployment bag body is made from 9 ounce Camouflage Green #483 cotton sateen, nylon webbing, cotton webbing and cotton tape.  A static line is attached through the break cord strap on inside of the bag under strap pocket and around deployment bag main strap or attached directly around the deployment bag main strap if the break strap is eliminated. The body of the pack tray is made from Camouflage Green #483 nylon pack cloth and the components that are sewn to the body are made from nylon pack cloth and nylon webbing. The harness assembly is made primarily from Camouflage Green #483, Type XIII nylon webbing.  The chest, back, and leg straps permit size adjustments. Each riser is 30 inches in length with the male fitting of the canopy release permanently attached. The Capewell lanyard pull release, P/N 100681, or the newer P/N 100681-2 Stainless Steel Slider (Cadmium Chromate Plated) for the canopy risers is incorporated as a safety feature, and allows quick and reliable release of the canopy when landing under high wind conditions or in the water.

T-10B

Performance Data

Technical Specifications

Technical Specifications

Technical Specifications