Rigging Innovations, Inc., in
keeping with its legacy of leading the industry, is proud to announce the debut
of a totally new concept in harness and container design. Named the VOODOO™,
the new design is the world's first dedicated FreeFly harness and container
system. Unlike current rigs which are descendants of 1970's speed star
designs, the VOODOO™ completely addresses the needs of the FreeFly
environment in terms of the attitudes and speeds encountered.
The VOODOO™ is the beginning of the next revolution
in rig technology. With the growth of FreeFlying and its more stringent
requirements, the VOODOO™ answers all the needs in the cleanest most
logical configuration. If others wish to satisfy the same requirements,
their designs will follow that same path that the VOODOO™ has blazed to
The VOODOO™ comes
standard with hip rings or multi-flex (hip and chest rings), kill-line pilot
chute, R.S.L., velcroless toggles, and hackey handle.
The heart of the design is the shape of the container system. The profile of the
container is curved from the top of the reserve to the bottom of the main
resulting in a completely aerodynamic shape that slices through the air no
matter what the attitude of the jumper in freefall. The container closing flaps
are designed to be easy to use yet completely secure in freefall.
The reserve protector flap has been completely re-designed to use the most
secure tongue combination in use today. The side tongues hold completely and the
bottom pocket smoothes out the profile and keeps any lines from snagging. The
internal pin pocket protects the pin from being dislodged.
The main pin protector flap is a streamlined variation of the upward closing
flap pioneered on the Telesis 2 and the Genera. Longer and more tapered than its
predecessors, it provides complete security and ease of use.
The main side flaps and riser covers have been integrated into one piece units
that provide maximum coverage and protection while resulting in an aesthetically
pleasing design that compliments the lines of the rig.
The BOC throwout installation is integrated into the bottom main flap in such a
way that the main bridle is completely covered without the need of special flaps
or covers. A ZP main pilotchute with a hackey handle and kill-line bridle is
For those who prefer a pull-out (POP) deployment, easy to grip completely secure
handle falls readily to hand.
The backpad has been designed to integrate with the reconfigured harness to
provide a new level of comfort and fit. A completely new yoke area provides a
hinge at the top of the container resulting in a better fit over the shoulder.
Additional padding makes comfort a key word in the Voodoo design.
Full metal 3-ring housings are standard. Both the 3-ring and reserve ripcord
housings have been lengthened and are attached to their pockets with clamps. The
cables remain fully covered and protected in all attitudes at all times.
The reserve container: The reserve deployment bag has been designed to allow
even greater ease of packing. At the same time, it provides a firm base for the
Stealth pilotchute and contributes to even better launches than what the Stealth
is known for.
The harness design and geometry have been designed to provide a level of fit and
comfort unmatched by any other to date! The yoke area has been lengthened as
well as the upper main lift web (MLW) to lower the 3-ring position and the chest
strap. The angle of the yoke has been re-shaped and tailored to provide maximum
security and comfort in a head down position.
The Multi-Flex harness configuration is standard provided an unequaled level of
comfort and flexibility. New custom built ring hardware made specifically for RI
and this application is used in the chest position. This hardware is forged flat
and eliminates he pressure points and discomfort associated with previous
designs. At the same time its use results in better articulation and freedom of
movement in all attitudes.
The "in-set" horizontal back strap has been designed to "snug" the container to
The lower main lift web/leg strap configuration features a totally new design
that results in an unparalleled level of fit and comfort. Call the "V-Flex"
configuration, it provides fully independent adjustment around the upper leg
while at the same time total articulation around the hip ring. Coupled with our
well known double-wide leg strap/pad design, the comfort must be experienced to
be believed. - Ask any Voodoo owner!
The main risers utilize a new Velcro-less toggle design that is flatter and more
secure than in the past.
80 Sq. Ft. ZP 9-Cell
Call For Current Low
Prices and Full-Rig Discounts.
100 Sq. Ft. ZP 9-Cell
to 107 Sq. Ft. ZP 9-Cell
113 - 120
to 120 Sq. Ft. ZP 9-Cell
to 135 Sq. Ft. ZP 9-Cell
126 - 135
to 150 Sq. Ft. ZP 9-Cell
143 - 150
to 170 Sq. Ft. ZP 9-Cell
Additional Chargeable Options Available,
See Order Form.