parachutes skydiving

    Now available in 6 standard thread sizes! Including the new 40.5mm size!
    Get the latest and greatest in low profile wide angle lens technology. These lenses were designed for the skydiver in mind with a low profile physical design creating less risk of line snags, and a large image area with Absolutely No Vignette! (Black corners in the image) 
    With a wide-angle lens, you can more easily include foreground subjects and emphasize the distance to the background. A wide-angle lens has a shorter focal distance than a normal lens. From any give spot an image is made with a wide-angle lens, it includes more field of view than with a normal lens. The Diamond 0.3x produces about a 110-degree field of view, the Stealth 0.5x produces about a 67-degree field of view, and the Platinum 0.2x produces about 180-degree field of view (actual field of view depends on your camcorder's specifications). Whether you prefer to use the Diamond 0.3x, the Stealth 0.5x or the Platinum 0.2x depends on how far away you think you might usually want to be from your subject.
    The NEW Diamond 0.3x in 27mm and 30.5mm Thread Size in Stock!
Do you have a JVC, Canon, Hitachi, Panasonic, Samsung or Sharp camcorder? Many of these models come in 27mm or 30.5mm thread sizes. You can now eliminate the adapter ring previously needed for any camcorder that is 27mm or 30.5mm. Another step forward for Royal Lens and the needs of its customers!
    Click on the links below for more information and pictures of this product.

• Ultra High Quality 0.3x Wide Angle Lens
• 110-degrees Field of View
• Super Low Profile (8mm in length, 44mm in diameter)
• Single Element Construction (Glass)
• Durable Anodized Aluminum Casing
• Minimal Barrel Distortion
• Absolutely NO Vignette ('black corners')
• Six standard Thread Sizes: 25mm, 27mm, 30mm, 30.5mm, 37mm and 40.5mm. (40.5mm is $189.99).
• Lens Cap included

General Information:

 

    Now available in 5 standard thread sizes! Including the new 40.5mm and 43mm size!
    The Redesigned Ultra High Quality 0.5x Wide Angle Lens. This is the Stealth 0.5 version 2.
    Get the latest and greatest in low profile wide angle lens technology. These lenses were designed for the skydiver in mind with a low profile physical design creating less risk of line snags, and a large image area with Absolutely No Vignette! (Black corners in the image)
    With a wide-angle lens, you can more easily include foreground subjects and emphasize the distance to the background. A wide-angle lens has a shorter focal distance than a normal lens. From any give spot an image is made with a wide-angle lens, it includes more field of view than with a normal lens. The Diamond 0.3x produces about a 110-degree field of view, the Stealth 0.5x produces about a 67-degree field of view, and the Platinum 0.2x produces about 180-degree field of view (actual field of view depends on your camcorder's specifications). Whether you prefer to use the Diamond 0.3x, the Stealth 0.5x or the Platinum 0.2x depends on how far away you think you might usually want to be from your subject.
    Click on the links below for more information and pictures of this product. Shipping Weight 8 oz. (225g).

• Ultra High Quality 0.5x Wide Angle Lens
• New Flat front surface
• New Stronger Glass
• Super Low Profile (8mm in length, 44mm in diameter)
• 67-degrees Field of View
• Single Element Resilient Glass Construction
• Durable Anodized Aluminum Casing
• No Barrel Distortion
• Absolutely NO Vignette ('black corners')
• Five Standard Thread Sizes: 25mm, 30mm, 37mm, 40.5mm and 43mm. (40.5mm and 43mm are $189.99).
• Lens Cap included

General Information:

 

    Look at the world in a totally new WIDE way! The Platinum 0.2x lenses were originally designed to give an even wider point of view. Every photographer should have this lens in their arsenal. Whether you're being artistic or need to cover a wider area than usual, the Platinum 0.2x lens is the one for you. Absolutely No Vignette! (Black corners in the image) Low Distortion Fish-Eye lens and Durable Anatomized Aluminum Casing.
    Get the latest and greatest in low profile wide angle lens technology. These lenses were designed for the skydiver in mind with a low profile physical design creating less risk of line snags, and a large image area with Absolutely No Vignette! (Black corners in the image)
    With a wide-angle lens, you can more easily include foreground subjects and emphasize the distance to the background. A wide-angle lens has a shorter focal distance than a normal lens. From any give spot an image is made with a wide-angle lens, it includes more field of view than with a normal lens. The Diamond 0.3x produces about a 110-degree field of view, the Stealth 0.5x produces about a 67-degree field of view, and the Platinum 0.2x produces about 180-degree field of view (actual field of view depends on your camcorder's specifications). Whether you prefer to use the Diamond 0.3x, the Stealth 0.5x or the Platinum 0.2x depends on how far away you think you might usually want to be from your subject.
    Click on the links below for more information and pictures of this product. Shipping Weight 8 oz. (225g).

• Ultra High Quality 0.2x ULTRA Wide Angle Lens
• Super Low Profile (12mm in length, 44mm in diameter)
• 180-degrees Field of View
• Low-Distortion Fish-Eye Lens
• Dual Element Resilient Glass Construction
• Durable Anodized Aluminum Casing
• No Barrel Distortion
• Absolutely NO Vignette ('black corners')
• Three Standard Thread Sizes: 25mm, 30mm and 37mm
• Lens Cap included

General Information:

Two lens caps are included with the Diamond 0.3x, Stealth 0.5x and Platinum 0.2x lenses, but sometimes we lose things. Need an extra lens cap? Plan ahead
Pick up an extra lens cap, or more. Keep one at home, keep one in your pocket, keep one wherever. Better safe than sorry.
Two lens caps create a secure case for your Diamond 0.3x, Stealth 0.5x or Platinum 0.2x. Throw your Royal Lens in your camera bag protected!
Shipping Weight: 2 oz. (60g)
 

These Step Up Adapter Rings can help fit together almost an video camera on the market today with a 37mm Diamond 0.3x, Stealth 0.5x, or Platinum 0.2x lens. This is especially helpful if your camera's thread size does not come in the standard thread sizes for these lenses, or if you have downsized to a different camera/thread size, and want to keep the same lens. Example : 27mm to 37mm means that a camera with a 27mm thread size will use this Step Up Adapter Ring to fit to a 37mm Diamond 0.3x, Stealth 0.5x, or Platinum 0.2x lens lens. Color: The 25mm to 37mm ring is silver and the rest are black. Shipping Weight: 2 oz. (60g).

General Information:

The Ops Drops are an Anti-Fog and Lens cleaner used by the U.S. Armed Forces typically in more dry environments. It can be used with any goggle, glass lens or plastic lens, Headgear Visors, Face Shields, Night Vision Goggles, Binoculars, Chemical & Gas Masks, Scopes, Dive Masks and Sunglasses. Recommended for use with Oxygn, Factory Diver and Flip-Up Factory Diver lenses. We have found it to be very effective on the Sorz, Kroops, Sky Eyes, and Ultimate Sports goggles. New goggles with a treated anti-fog lens tend to show little or no anti-fog difference with the Ops Drops applied. The Ops Drops come with a soft lens cleaning cloth that will help clean your goggle or lens without scratching. Make sure to rinse off your goggle or lens in water first, to help remove any fine dust, dirt, or sand that could possible scratch your goggle or lens when cleaning it. Will not harm surrounding silicone or rubber support frames. Not recommended for swim goggles.
 Shipping Weight 8 oz. (225g).

Prevent your camera's housing from fogging, even in cold temperatures/humid environments. Great value and performance: includes 3 sets of anti-fog inserts. Each set lasts 4-5 uses and can be dried in an oven (3 minutes) and used again.
United States Sales Only. This product cannot be sold Internationally.

What's Included:

• 3 Sets of Anti-Fog Inserts

The ContourHD 1080p is the World’s First and Smallest wearable video camera. It’s light but armored body “slides and locks” ContourHD 1080p onto a series of mounts for your goggles, headgear, handle bars, vehicle, or anywhere else you want. Wear HD video and record your adventures hands-free!
Built to be operated with a pair of gloves on, ContourHD 1080p uses a single button to capture hours of HD video to an internal microSD memory card (2GB included). With no wires or tapes, the ContourHD 1080p makes it easy to capture Full HD video from within the action.
Shoot to share with our Easy Edit software. Connect ContourHD 1080p to your computer, clip the best parts, and share your camera adventures online in seconds.

Details: 5 Megapixel Sensor. Codec: H.264 (AAC audio). File Type: .mov

Audio: Internal Microphone. AAC Audio Compression

Lens: 135° - 960p and 720p. 110° - 1080p and WVGA

Memory: Removable MicroSD. SDHC compatible. Capacity: 16GB (2GB included)

Easy Edit Software: Compatible with Mac (10.4, 10.5, & 10.6), Windows (XP, Vista, Windows 7), Videos Download via USB 2.0

What’s In the Box: ContourHD 1080p Camera. MicroSD Card (2GB). Goggle Mount. Flat Surface Mount. Rechargeable Battery (3hrs). USB Cable

Battery & Power: Removable Lithium-Ion Battery. Record Time: Up to 3 hours. Charge via USB to Computer or chargers (sold separately). Charge Time: 4 hours (average)

Body: Water Resistant. Aluminum and Fiberglass Body. Compatible with TRail Mount System

Shipping Weight: 1 lb. (455g).

Whether you're shooting Arizona Arsenal, a tandem, or military training, take charge with the HYPEYE D PRO Camcorder Indication and Control System. Made specifically for skydivers, the HYPEYE D PRO controls Sony camcorders through the D/AV half-moon interface. The HYPEYE D PRO provides features and functionality never before seen in any camcorder controller. Its super-bright, intuitive, three LED indication system keeps you informed of your camcorder's status even when facing the sun!
 

• Push button to power on/off & start/stop recording
• Toggle between record & playback modes
• Debrief jack for non-intrusive video viewing
• Push button protection against accidental activation
• Zoom Memory
• External audio sourcing
• Nylon threaded mounting hole
• Adjustable LED brightness

Shipping Weight 8 oz. (225g).

General Information:

This kit was designed for the videographer who wants the most tricked out camera headgear around. It can also be used for custom camcorder setups for any application.
Allows users to:
 

• While recording, capture still pictures onto your camcorder by using an external switch. (Standard 2.5mm bite or tongue switch will work). Photo features require compatible camcorder and external switch.
• Use your camcorder as a dedicated still camera. Photo features require compatible camcorder and external switch.
• Interface to L&B Optima audible for visual warning indication. It will only couple with No. I10501 Optima II With LED Connection Port, or original Optima audible altimeters with the LED already built in.
• Custom push button interface. Enables control of the camcorder via the user’s own push button. (Push button supplied by user).
• Includes the No. L2433 Hypeye D Pro Photo Kit.
• Includes the No. L12432 Hypeye D Pro Debrief Cable.

Shipping Weight: 8 oz. (225g).

General Information:

This cable allows you to debrief through the HYPEYE D PRO without dismounting your camcorder. You can easily plug this cable into your HYPEYE D PRO and then into a TV for quick viewing of the last jump. It's a must for teams in training. This cable comes as part of the No. L12431 HYPEYE D PRO EXPANSION KIT.
Shipping Weight: 6 oz. (170g).

The HyPeye D Mini is a AV/R 90 degree (half moon/ 'D') connector port video camera indicator. It is the same as the HyPeye except that it has a different plug. It is similar to the CamEye II in that it shows the status of your video camera with LED lights, but it does not have a control switch. The reason people choose the HyPeye D Mini is if they are looking for a camera indicator but do not require an external control switch. A switch can break, adds more items to your headgear and sometimes requires drilling another hole in your headgear to cleanly house it. The HyPeye D Mini is plugged into your camera's AV/R (half moon/ 'D') port and can be easily mounted to your eye sight with the enclosed zip ties, or it can used without an eye sight since the LED's are so bright. The HyPeye D Mini will display a Blue, Red, or Yellow light depending upon the status of your camera. Most Sony Camcorders will work with the HyPeye D Mini that have a AV/R (half moon/ 'D') port. Manufacturers other than Sony are not tested however the HyPeye D Mini may work with their remote jack. The display is 0.3" x 0.7" (8mm x 18mm). The cable is 21" (53cm) long.
Shipping Weight: 6 oz. (170g).

General Information:

The HyPeye Mini is an LANC port video camera indicator. It is similar to the CamEye II in that it shows the status of your video camera with LED lights, but it does not have a control switch. The reason people choose the HyPeye Mini is if they are looking for a camera indicator but do not require an external control switch. A switch can break, adds more items to your headgear and sometimes requires drilling another hole in your headgear to cleanly house it. The HyPeye Mini is plugged into your camera's LANC port and can be easily mounted to your eye sight with the enclosed zip ties, or it can used without an eye sight since the LED's are so bright. The HyPeye Mini will display a Blue, Red, or Yellow light depending upon the status of your camera. Most Sony Camcorders will work with the HyPeye Mini that have a LANC/Remote jack. Manufacturers other than Sony are not tested however the HyPeye Mini may work with their remote jack. The display is 0.3" x 0.7" (8mm x 18mm). The cable is 30" (76cm) long.
Shipping Weight: 6 oz. (170g).

General Information:

2.5mm plug. Stereo Plug Only. Now a compact, low profile, hands free operation for your still camera. New features include: the introduction of a 90 degree bend at the wire to switch junction, a wider switch for more comfortable and reliable operation, thicker/more durable/more resilient metal contacts, a clearly marked "Bite Zone" to demarcate the proper area to bite, and high temperature thermoplastic and epoxy for better heat resistance. It's now easier to use and much more tolerant of misuse. This switch fits comfortably in your mouth, is extremely easy to use, and will take one or multiple exposures. They're perfect for freeflyers and anyone wanting hands-free photography without jumpsuit circuitry. The Bite Switch works best with open-faced headgear. Individually tested and guaranteed to function for thousands of shots. The design has been tested up to 3000 bites without a malfunction, and none have failed in the field when used properly. The Conceptus Bite Switch is ready-to-use with most Canon cameras and can be adapted to almost any camera with a remote shutter release jack. It's easy to connect and disconnect from your camera, and can be easily spit out at the end of the dive or if you need to cut away your headgear. It measures 23" long, switch body is 1/4" diameter. Shipping Weight: 4 oz. (110g).

Digital plug. For Canon: D30, D60, 10D, 20D, 30D, 5D, D1, D1 Mark II, Ds1, and Ds1 Mark II as well as other Canon cameras using this type of digital plug.
Now a compact, low profile, hands free operation for your still camera. New features include: the introduction of a 90 degree bend at the wire to switch junction, a wider switch for more comfortable and reliable operation, thicker/more durable/more resilient metal contacts, a clearly marked "Bite Zone" to demarcate the proper area to bite, and high temperature thermoplastic and epoxy for better heat resistance. It's now easier to use and much more tolerant of misuse. This switch fits comfortably in your mouth, is extremely easy to use, and will take one or multiple exposures. They're perfect for freeflyers and anyone wanting hands-free photography without jumpsuit circuitry. The Bite Switch works best with open-faced headgear. Individually tested and guaranteed to function for thousands of shots. The design has been tested up to 3000 bites without a malfunction, and none have failed in the field when used properly. The Conceptus Bite Switch is ready-to-use with most Canon cameras and can be adapted to almost any camera with a remote shutter release jack. It's easy to connect and disconnect from your camera, and can be easily spit out at the end of the dive or if you need to cut away your headgear. It measures 23" long, switch body is 1/4" diameter. Shipping Weight: 4 oz. (110g).

2.5mm plug. Stereo Plug Only. Similar to the Bite Switch except this is controlled by your tongue. The Tongue Switch works with even the tightest full-face headgear and chin cups, and requires no jaw movement or blowing. It is operated by a movement similar to pressing your tongue against the front teeth. It measures 23" long, switch body is 1/2" wide.
Shipping Weight: 4 oz. (110g).

Digital plug. For Canon: D30, D60, 10D, 20D, 30D, 5D, D1, D1 Mark II, Ds1, and Ds1 Mark II as well as other Canon cameras using this type of digital plug.
Similar to the Bite Switch except this is controlled by your tongue. The Tongue Switch works with even the tightest full-face headgear and chin cups, and requires no jaw movement or blowing. It is operated by a movement similar to pressing your tongue against the front teeth. It measures 23" long, switch body is 1/2" wide.
Shipping Weight: 4 oz. (110g).
 

The Pro Mouth Switch is a new still camera mouth switch. This switch features a very low profile end which is very comfortable in your mouth.
For: Canon Digital Rebel 300D, Canon Digital Rebel XT 350D, Canon Rebel film cameras, and any other cameras using a 2.5mm plug.
Recommended use: Place the PRO Mouth Switch between your tongue and the roof of your mouth, and then press it. Biting it with your teeth is not recommended as it can damage the Pro Mouth Switch. Length is 32" (81cm).
Shipping Weight: 6 oz. (170g).

The Pro Mouth Switch is a new still camera mouth switch. This switch features a very low profile end which is very comfortable in your mouth.
For Canon: D30, D60, 10D, 20D, 30D, 5D, D1, D1 Mark II, Ds1, and Ds1 Mark II as well as other Canon cameras using this type of digital plug.
Recommended use: Place the PRO Mouth Switch between your tongue and the roof of your mouth, and then press it. Biting it with your teeth is not recommended as it can damage the Pro Mouth Switch. Length is 32" (81cm).
Important: This model of the Pro Mouth Switch is configured for fast action photography. If you’re using AUTO FOCUS make sure your focusing mode is set to AL SERVO for proper functioning (If the Pro Mouth Switch is plugged into your camera it should start focusing as soon as the power is turned on). O: AE/AF AE lock This setting can be found at: Menu -> Custom Functions -> Shutter button/EA lock button.
Shipping Weight: 6 oz. (170g).

This switch is an easy way to trigger your 35mm camera. The push button is water tight and is easily triggered by biting down or depressing the button with your tongue. Your camera must accept a remote shutter release and you must have the wire plug-in to fit your particular camera. The switch has two leads and is simple to splice to into most 35mm camera electronic remote shutter releases. The kit includes switch and installation instructions. Bite switch head measures 1.5" X .75" X .25". Shipping Weight: 6 oz. (170g).

Trigger your 35mm camera's shutter hands-free with this mouth-activated remote shutter release. Short puffs into the hose fire off single shots while a constant blowing pressure will yield continuous shooting. To use the Blow Switch your camera must accept a remote shutter release and you must have the wire plug-in to fit your particular camera. To install simply cut your shutter release's button off and solder the two wires that trip your camera's shutter to the two terminals on the Blow Switch micro-switch. The kit includes the micro-switch/diaphragm unit, pressure hosing and installation instructions. Shipping Weight: 6 oz. (170g).

The Zkulls™ insert is an additional adapter piece, useful when different types of cameras or mounts are used. Cameras can be swapped within seconds. The Zkulls™ inserts are made from the same coated aluminum as the base ring of the system.
Shipping Weight: 6 oz. (170g).

The Zkulls™ Anti Twist Kit helps fix the heading of your video camera. The kit includes the anti twist plate, a camera finger screw, and a secure pin which is coupled with No. L5805 Zkulls or No. L5810 Insert For Zkulls (sold separately). This helps to avoid unwanted twists of the video camera position. No tools or additional holes needed for installation.
Shipping Weight 8 oz. (225g).
 

This is a double secured GoPro Hero mount. Simply by flipping the GoPro forward you can easily open the camera housing without unscrewing.
You can also add an additional stills or video camera to the top of the bracket. The Anti Twist pin for the video camera and anti twist strap for the still camera is included.
Dimension of top plate: 6.3" x 2.3" (16cm x 6cm).
Shipping Weight: 1 lb. (455g).

The Zkulls™ Stills Base Plate is a mounting plate for still cameras. It has a Velcro strap to fix the camera heading. It also incorporates a channel to route a tongue or bite switch cable underneath the camera body and into your headgear. It is meant to be coupled with No. L5805 Zkulls (sold separately) but can be mounted directly to headgear. There are slots on the base to allow fine adjustment of the camera's heading, left or right. Fits: Canon D350, D400, D450, D1000, Canon Rebel XT, XTI, XSI, XS, Nikon D40, D50, D60, and similar camera bodies.
Shipping Weight: 1 lb. (455g).

The Zkulls™ Stills Switch Bracket is ideal for wanting to switch between panoramic and vertical pictures. The bracket can be mounted horizontally or vertically on top of your headgear, as well as vertically side mounted. It is meant to be coupled with No. L5805 Zkulls (sold separately) but can be mounted directly to headgear. If you plan on quickly switching from horizontal to vertical shooting, then an additional No. L5810 Zkull Insert is recommended. There are slots on the base to allow fine adjustment of the camera's heading, left or right. Fits: Canon D350, D400, D450, D1000, Canon Rebel XT, XTI, XSI, XS, Nikon D40, D50, D60, and similar camera bodies.
Shipping Weight: 1 lb. (455g).

The Zkulls™ Dual Mounting System is a top mount video platform with front mount bracket for stills. The front mount is connected with No. L5805 Zkulls (Included), which can be easily put on or taken off. The plate slides backwards and forwards to easily fit Zkulls equipped headgear. This is for camera flyers who prefer a top mount setup. It is meant to be coupled with No. L5805 Zkulls (sold separately) but can be mounted directly to headgear.
Shipping Weight: 1 lb. (455g).

The Zkulls™ CX Cage Bracket is a C shaped cage bracket that fits Sony cameras. Although this is meant to be used as a top mount, it can be used as a side mount as well. The camera can be switched upside down for freefly coaching and competition. For wingsuit flyers, the camera can be switched 90 degrees. It is meant to be coupled with No. L5805 Zkulls (sold separately) but can be mounted directly to headgear. If you plan on quickly switching from horizontal, to 90 degree, to upside down filming, then an additional one or two No. L5810 Zkull Insert is recommended.
Shipping Weight: 1 lb. (455g).

This is the new Schumacher precision machine quick release bracket. It has a number of new features not previously available on other quick release brackets. For starters this bracket is extremely light, weighing in at just over 3 oz, and very compact. It measures 3 1/2" x 2" x 5/16" (8.9cm x 5.1cm x 0.8cm). The camera plate has beveled edges so that you can easily slide your camera plate in and out. The beveled edges also have a secondary benefit which is that it will depress the pin when sliding in the camera plate. You can use just one hand to install it, there is no need to have to pull on the pin while sliding in the camera plate. An audible click will tell you the camera plate is secure. Can be used for video or still cameras. Comes complete with black anodized base plate, camera plate, camera Allen screw, Allen wrench, no skid camera grip surface and base plate flush-mounting hardware. Measures 3 1/2" x 2" x 5/16" (8.9cm x 5.1cm x 0.8cm). Shipping Weight: 8 oz. (225g).

This is an extra camera plate used in conjunction with the No. L1369 Schumacher Quick Shoe Camera Mount. If you switch between several cameras and do not want to always have to switch the camera plate to each camera, then one of these will be needed.
Shipping Weight: 4 oz. (110g).

With this Camera Quick Release you can mount and dismount your camera faster than ever! Compact, low-profile quick release that easily docks and locks your camera or bracket. Instead of having to always get out the screwdriver to release your camera you can now do it with the push of a button. The quick release base unit will mount to your headgear and the mounting plate will mount to your camera. When pressed together they then lock in place. This quick release has been rated for equipment weighing 6.5 lbs or less. This should include 35mm and medium format cameras (Excluding those with extremely long telephoto lenses attached), and 8mm or similar format cameras. Net Weight 5.5 oz. Dimensions: 3 1/2" L x 2" W x 1/2" D.
Shipping Weight 8 oz. (220g).

This is an extra camera plate used in conjunction with the No. L12485 Camera Quick Release. If you switch between several cameras and do not want to always have to switch the base plate to each camera, then one of these will be needed.
Shipping Weight: 4 oz. (110g).

The GOLDMEMBER is a precision machined aluminum camera quick release bracket that will easily mount to any surface you would normally attach a camera to. With a simple pull of the locking piston ring, the center of the GOLDMEMBER slides out making it quick and easy...YET SECURE... to add and remove cameras (video and/or still cameras) whenever you want. Low profile pull-ring is small and not easily disengaged until you want it to! Small, simple and rock solid, the new GOLDMEMBER is a powerful addition to any camera flyer's arsenal of equipment. Comes complete with hard gold anodized Base Plate, Camera Plate, Camera Allen Screw, no skid camera grip surface and base plate flush-mounting hardware. Additional Goldmember camera plates can be purchased so switching between cameras is quick and easy. Dimensions: 2" L X 3.5" W X 0.5" D.
Shipping Weight: 8 oz. (225g).

This is the extra camera plate for the Goldmember. You can purchase multiple camera plates in order to attach to multiple cameras, video and still, so that when you want to switch cameras on the Goldmember base plate it's as simple as sliding one camera out, and another right in.
Shipping Weight: 8 oz. (225g).

Although a smaller mounting platform, this is the only mount that gives you the ability to direct your camera in 4 directions. The mounting plate has a notch on each of the four sides for easy rotation. Whether you are flying your canopy in formation or flying a wingsuit you can direct your camera in the right direction with the Sky Systems QUICK QUAD CAMERA MOUNT. Dimensions: 2.25" L x 2.5" W x 0.37" D.
Shipping weight: 8 oz. (225g).
 

This is the extra camera plate for the Quick Quad. You can purchase multiple camera plates in order to attach to multiple cameras, video and still, so that when you want to switch cameras on the Quick Quad base plate it's as simple as sliding one camera out, and another right in.
Shipping Weight: 8 oz. (225g).

The Liquid Flatlock is a low profile camera quick release. The Flatlock will fit to any flat surface and is ideal to mount cameras to the top or side of any headgear. The Flatlock comes complete with all fasteners needed to mount to your headgear's flat surface, as well as one camera screw and hex key. If you're looking for a rigid, low profile quick release then the Flatlock is the one for you. Dimensions: 3.9" L X 3" W X 0.3" (100mm L X 75mm W X 8mm D).
Shipping Weight: 8 oz. (225g).

This is the replacement plate for Liquid Flatlocks manufactured after June 2009. It will not work with Liquid Flatlocks manufactured before June 2009.
This is an extra camera plate used in conjunction with the No. L5735 Liquid Flatlock. If you switch between several cameras and do not want to always have to switch the camera plate to each camera, then one of these will be needed.
Shipping Weight: 4 oz. (110g).
 

This is the original Liquid Flatlock replacement plate, and is used with Liquid Flatlocks manufactured prior to June 2009. This plate will not fit Liquid Flatlocks manufactured after June 2009.
Shipping Weight: 4 oz. (110g).

The Flatlock Adapter allows you to mount the No. L5735 Liquid Flatlock to any of the Cookie range of headgears. The adapter is made of molded polyurathane and includes all the fasteners needed to mount to your headgear.
The MXV Small Flatlock Adapter will fit MXV sizes XS, Sm, Med.
The MXV Large Flatlock Adapter will fit MXV sizes Lg, XL, XXL.
The Rok Flatlock Adapter will fit all sizes of the Rok.
The GAS Flatlock Adapter will fit all sizes of the GAS.
The Ozone Flatlock Adapter will fit all sizes of the Ozone.
 Shipping Weight: 8 oz. (225g).

This universal top mount platform is used for mounting a video or still camera on top of your Mindwarp, or any other headgear with a curved top. Drilling and assembly of three mounting screws (screws included) is required. Cameras not included. 
Shipping Weight: 1 lb. (455g).

The altimount has been updated for 2007. It now has a 45' angle bend and is to be mounted on the right side mudflap for better viewing. The Alti-mount is a great solution for chest mounting a visual altimeter. The Alti-mount is a carbon fiber 'L' bracket that slip into the right ring cover or mudflaps on the front of your skydiving harness and with a Velcro strap lock in place so your altimeter is in the same place every time regardless of body position. Most importantly, the Alti-mount is designed not to interfere with the operation of the 3-ring release system or cutaway handles.
Shipping Weight: 1 lb. (455g).

The Parasite 2 is a Dual Camera Side Mount system designed for hands free capturing of still and video images simultaneously. The adjustable feature is intended for flat sided headgear. The video bracket portion is designed for cameras that are approximately 2.5" or more from the bottom of the camera to the bottom of the lens. The still bracket portion is designed for vertical pictures only and should accommodate most small 35mm cameras available today. A tongue switch or bite switch will be needed to operate the still camera, and consequently the camera will need a remote shutter plug.  A digital still camera may be able to be used if it has a remote shutter plug. The adjustment pattern on the Parasite 2 allows for quick and easy 30 degree rotation of the camera mount on the headgear. Several bolt holes in the headgear could be utilized, so there are countless possibilities. Color: Black
Shipping Weight: 1 lb. (455g).

CamEye II
Take Control of Your Camera

    Take control of your camera. The CamEye II is specially designed for skydivers but can be used in any situation where  it's difficult to reach the camera. With short clicks on the red button you can toggle in between Start and Standby Modes, to save tape.
    By holding the button down you can actually turn your camera OFF and back ON, saving battery life.
    Three different indication lights (Blue, and Red) will indicate the camera's status at all times.
    SONY and Canon camcorders with a LANC jack can be controlled via CamEye II. Other brands that also have LANC ports may also work with the CamEye II. The CamEye II is always tested on real camcorders.
    The CamEye II is not just a light. A microcomputer inside the CamEye II controls the camera and reads the status for you. CamEye II works in parallel with the normal control buttons on your camcorder. This means that you can still operate the camera the normal way. The LANC cord is 17.5" (45cm) long. The LED cord is 13" ( Shipping Weight: 6 oz. (170g).
Click Here for more information and on the CamEye II.

Click Here for a list of tested camcorders

The CamEye SPORT LANC remote control was designed for use in extreme sports together with a "bullet" type camera lens connected to your video recording device (video camera with AV in capability or video recording deck). It an be used in many sports outside of skydiving such as, bicycling, skiing and snowboarding, auto racing, motocross, motorcycle racing, paragliding, and windsurfing to name just a few. The CamEye SPORT can also control the recording device in CAMERA mode. The CamEye SPORT detects the recording device operation mode (VCR or CAMERA) and sets the correct control commands automatically. 
    The CamEye SPORT makes it easy to start and stop recording - great for saving valuable and expensive DV tapes - no more unnecessary film shots. A short click on the red button toggles between recording and standby. The feedback LED indicator shows the camera status and even tells you when it's time to replace the tape or recharge the battery. LANC cord is 3.3 feet (100cm) long.
    The CamEye Sport exists now in three versions. V1.4, V1.6 and V1.8.. We recommend V1.4 for Canon models and Sony's models with a power switch with unique positions for each mode "old fashion" (memory, camera, vcr, off, etc), V1.4 controls recording both in camera and in VTR mode. V1.6 is recommended for newer Sony's models which have a toggle mode selection power switch and it will only work in VTR mode, this model overrides the mode selector switch on the camcorder. With "toggle switch" we mean a switch that you need to push several times in order to toggle between the different modes (memory,camera, vcr, etc). V1.6 solves the issues with camcorders like SONY HC40 which has a "soft" mode selector switch. The mechanical switch for selecting the operation mode have been replaced on a number of newer camcorders (see list below) from Sony by a push button. By pressing the button repeatedly available operation modes is selected one by one each time the button is pushed. The selected mode is however not remembered when the camcorder is turned off so each time the camcorder is turned ON it starts from CAMERA mode and the user has to select the desired user mode (MEMORY / PHOTO / VTR etc.) even if it was used in VTR (PLAYER) mode before being turned OFF. CamEye SPORT (version 1.4 or earlier) will therefore not function as intended if the camcorder is turned OFF and in VTR (PLAYER) mode. Each time the camcorder is turned ON, either by the switch on the camcorder or via CamEye SPORT, it will start up in CAMERA mode and the user have to put the camcorder in VTR (PLAYER) mode manually. CamEye SPORT (version 1.4 or earlier) works in CAMERA mode also so the user can be fooled to believe that the camcorder is in VTR mode and recording when it’s recording in CAMERA mode.
Models affected by this issue:
The list below is based upon currently known models which have AV in and LANC functionality from Sony. The list might be extended to future models if released after the publication of this bulletin. 
DCR-HC30, DCR-HC40, DCR-HC65, DCR-HC85, DCR-HC96E
DCR-IP210, DCR-IP220, DCR-IP45, DCR-IP55
DCR-PC108, DCR-PC109, DCR-PC330, DCR-PC350, DCR-PC1000E
HDR-HC1
Recommendation: We do not recommend the sale of CamEye SPORT version 1.4 or earlier to user of the above camcorders.
The new version is called CamEye SPORT V1.8 and it will only be compatible with Sony DVD and Hard Disk equipped camcorders with AV in capabilities. Tape based camcorders will not be compatible with this remote. V1.8 powers up Sony DVD and Hard Disk camcorders in the 'rec ctrl' mode where AV-in recording is controlled. DVD and Hard disk camcorders do not have the same capability to start recording in VCR mode directly from play mode like camcorders, using tape as recording media, have.

Unless otherwise specified, V1.4 will be shipped.
Shipping Weight: 6 oz. (170g).
Click Here for more information and on the CamEye Sport

Click Here for a list of tested camcorders

The Ops Drops are an Anti-Fog and Lens cleaner used by the U.S. Armed Forces typically in more dry environments. It can be used with any goggle, glass lens or plastic lens, Headgear Visors, Face Shields, Night Vision Goggles, Binoculars, Chemical & Gas Masks, Scopes, Dive Masks and Sunglasses. Recommended for use with Oxygn, Factory Diver and Flip-Up Factory Diver lenses. We have found it to be very effective on the Sorz, Kroops, Sky Eyes, and Ultimate Sports goggles. New goggles with a treated anti-fog lens tend to show little or no anti-fog difference with the Ops Drops applied. The Ops Drops come with a soft lens cleaning cloth that will help clean your goggle or lens without scratching. Make sure to rinse off your goggle or lens in water first, to help remove any fine dust, dirt, or sand that could possible scratch your goggle or lens when cleaning it. Will not harm surrounding silicone or rubber support frames. Not recommended for swim goggles.
 Shipping Weight 8 oz. (225g).

The Sea Drops are an Anit-Fog and Lens cleaner used by the U.S. Armed Forces typically in more moist environments. It can be used with any goggle, glass lens or plastic lens, Headgear Visors, Face Shields, Night Vision Goggles, Binoculars, Chemical & Gas Masks, Scopes, Dive Masks and Sunglasses. Do not use with Oxygn, Factory Diver and Flip-Up Factory Diver lenses as it will cloud the lens. We have found it to be very effective on the Sorz, Kroops, Sky Eyes, and Ultimate Sports goggles. New goggles with a treated anti-fog lens tend to show little or no anti-fog difference with the Sea Drops applied. The Sea Drops come with a soft lens cleaning cloth that will help clean your goggle or lens without scratching. Make sure to rinse off your goggle or lens in water first, to help remove any fine dust, dirt, or sand that could possible scratch your goggle or lens when cleaning it. Will not harm surrounding silicone or rubber support frames. Not recommended for swim goggles.
Shipping Weight 8 oz. (225g).

Long lasting, high performance, Xtreme Antifog concentrated paste compound, used to clean and polish plastics and glass as well as eliminate fog on visors. It's the one and only Xteme Antifog, and the science is simple. Reduce surface tension and you stop the fog before it starts. The latest in micro polymerization technology has fused together the longest lasting surface tension reducing agents with a powerful antistatic formula.
Can be used with Oxygn, Factory Diver, and Flip-up Factory Diver lenses, but not recommended.
Shipping Weight: 8 oz. (225g).

This specially designed camera mount allows the most popular PC style cameras to be installed on the side of headgear. The holder is adjustable in height, and has preset holes at the bottom to accept differently placed thumb screws (thumb screw not included), as well as padding to avoid damages to the body of the camera. The metal and padding of this mount helps protect the camera from the top, bottom, and outside facing side of the camera, which not all side mounts do. Installation is required and usually involves the drilling of three holes. 3" W x 3 1/4" to 5 3/4" H x 2" D. Camera not included.
Shipping Weight: 1 lb. (455g).

As the name suggests, it truly is "The bracket" for all of your camera needs. Whether you want to mount a still camera on the front of your Vapor, side mount a video camera on an Nvertigo, or even use it to mount a vertical still camera on top, this is the only bracket you'll ever need. Comes with most of the necessary hardware for a variety of options.  3" W x 3 1/2" H x 2 1/2" D (76mm x 89mm x 63mm).
Shipping Weight: 1 lb. (455g).

    Design Features:

• Anodized aluminum bracket is strong yet lightweight.
• Includes mounting hardware for several applications.
• Camera thumb screw included.
• Strap provided or extra security.
• Some drilling may be required.

    Uses:

• Front mount still camera.
• Side mount video camera.
• Top mount vertical still camera.
• Can be used for other applications.

The camera condom is a protective neoprene cover that fits your video camera like a glove. They are easy to put on and are designed to help protect the camera from dust, condensation, cold weather, lens fog, and damage from riser slap and abrasion. The thermal properties of neoprene insulate your camera from rapid temperature changes which cause condensation, cold weather shutdown, and lens fog. The camera condom is form fitting and eliminates the need for a bulky or non-aerodynamic rigid closure. Please note that the camera condom does not provide any protection against impact such as a rigid enclosure does.
Sony PC Camera Options:
PC 1/3, PC 4/5/8, PC 7/10/100, PC 6/9/101, PC 103/105/106, PC 109, PC 110, PC 115/120, PC 330, PC 350
HC 20/21/30/32/40/42
HC 90/96
Sony TRV Camera Options:
TRV 18/25/27/38/39/70/80.
JVC Camera Options:
JVC GR-DVM 50U/70U/80U/90U.
Shipping Weight: 1 lb. (455g).

Please Note: The 'A' length DOES NOT include the dimensions for the camera lens, battery and or viewfinder. It is only the length of the camera body from front to back.

The Bonehead carbon fiber D-Box is meant for mounting and protecting newer Sony handycams to the side or top of headgear. The new box design features a camera entry from the top where your camera then slides down into the box. A hard carbon fiber hinged top then closes over the top of the camera and is held in place by plastic cable which threads through the aluminum hinges, similar to a door hinge. An extra piece of foam with adhesive backing comes with the box to help shim the camera in place and prevent shaking. These D-Boxes can mounted to any headgear with a flat side or top surface, depending on the box. Power buttons at the rear of the camera are accessible when inside the box. Installation is required and usually involves the drilling of two or three holes. These D-Boxes are camera specific to either the Sony HC, IP PC, or TRV style cameras. Some non-Sony cameras will fit these boxes. Shipping Weight: 2 lbs. (900g).

Cookie BlackBoxes are designed to specifically fit Sony cameras. These boxes come complete with stainless steel mounting screws and an aluminum retaining screw. Cookie BlackBoxes are designed to have only just enough room for your camera. This gives you the most compact and best fitting camera box available. Depending on the box, the BlackBox will fit any flat side or flat top camera headgear, check the table below. The TG1/TG3 box and TG5/7 box will fit wide angle lenses with a 30mm thread size. The wide angle lens screws the the box itself.

The X-JAKET family has grown to include the latest camera style and sizes!
We are continually working on expanding and updating the X-JAKET family as new and improved camera become available.
The X-JAKET is designed to attach to most headgear! It is easy to install and easy to remove.
Shipping Weight: 1 lb. (455g).

This Bonehead side mount "L" bracket is used for mounting the newer style digital video cameras. It will fit any Mindwarp or any other headgear with a flat side for mounting. The 'L' Bracket can be mounted right-side up or upside-down for inverted filming. Horizontal and vertical straps in addition to the camera screw hold the camera in place. Drilling and assembly of two mounting screws (screws included) is required. 3 1/2" W x 2 1/4" H x 2 1/4" D, inside diameter. Camera not included.
Shipping Weight: 1 lb. (455g).

A new and very comfortable chin cup. This molded chin cup design comes with two easy to use locking mechanisms on either side of the cup for easy adjustment. Wing nuts on the end of each adjustable plastic strap are for attaching to most open faced headgear.
Shipping Weight: 8 oz. (225g).

This chin cup is Bonehead's newest incarnation and is the one found on the Optik 210. This new chin cup design conceals the ladder straps inside for sleeker look and less snag potential!! Features removable padding for easy replacement or washing. It can be easily added to the Pimp Daddy or most other open face headgear. It comes with nut and bolt mounting hardware.
Shipping Weight: 8 oz. (225g).

This Sky Systems Sky Cup can be easily added to the Hurricane, Nvertigo X, or most other open face headgear. The padded chin cup has a black finish and is adjusted with the Alligator Snaps on the sides of the cup. It comes with nut and bolt mounting hardware.
Shipping Weight: 8 oz. (225g).

This is the newest incarnation of the Sky Systems Chin Cup. The Sky Cup II features a slightly larger design which helps to wrap around your chin more, making your headgear more secure. The ultra comfortable chin cup cradles your chin and the ladder straps hold it tight. The Sky Cup family works with most open face headgear. The padded chin cup has a black finish and is adjusted with the Alligator Snaps on the sides of the cup. It comes with nut and bolt mounting hardware.
Shipping Weight: 8 oz. (225g).

 

This easy to install rigid chin cup modification offers additional stability for the Velocity headgear. It is most popular when used with a Velocity equipped with one or two camera platforms. The unique ratcheting system makes it quick and easy to adjust the chin cup for a comfortable and secure fit. The kit comes complete with a rigid chin cup with a soft liner, attachment hardware, and mounting instructions.
Shipping Weight: 8 oz. (225g).

This kit allows for the quick release, cutaway, of your headgear. It works with the Vapor and Vapor Narrow as well as with chin cups.
Shipping Weight: 8 oz. (225g).

This is Bonehead's chin cup cutaway system. It is meant for being able to quickly cutaway your headgear in case of an emergency in the air or on the ground. Using this cut away system during freefall will most likely result in the loss of your headgear & camera equipment. This chin cup cutaway system can be used in conjunction with the Bonehead Chin Cup, as well as most other chin cups. The kit includes a cotter pin, cutaway loop, spring, washers, and Velcro. Installation is straightforward. Instructions included.

Vertical Orientation	Diagonal Orientation

1/4" ringsight. A new camera sight that offers versatility and durability. This sight's polarized optics are covered with glass, allowing you to use a t-shirt or other soft cotton cloth to clean the surface of your sight without fear of scratching the optics.  
These sights also have a threaded retaining ring and rubber o-ring that keep the optics in place, yet allow you to change the orientation of the optics to suit your preference. The shaft also comes off to allow you to custom cut the shaft to size without endangering the optics. 
Please Note: This is a 1/4" ringsight and can only be used with 1/4" Swivel Clamps, No. L1361 Schumacher 1/4" Swivel Clamp, or No. L1237 Swivel Clamp and Mounting Post. Sold separately.
Shipping Weight: 6 oz. (170g).

Vertical Orientation	Diagonal Orientation

6mm ringsight. Same as No. L1235 except that this is a 6mm ringsight.
A new camera sight that offers versatility and durability. This sight's polarized optics are covered with glass, allowing you to use a t-shirt or other soft cotton cloth to clean the surface of your sight without fear of scratching the optics.  
These sights also have a threaded retaining ring and rubber o-ring that keep the optics in place, yet allow you to change the orientation of the optics to suit your preference. The shaft also comes off to allow you to custom cut the shaft to size without endangering the optics. 
Please Note: This is a 6mm ringsight and can only be used with 6mm Swivel Clamps, No. L1366 Schumacher 1/4" x 6mm Swivel Clamp, or No. LB1243 Holder For Ring Sight. Sold separately.
Shipping Weight: 6 oz. (170g).
 

1/4" ringsight. This genuine concentric rings Newton Sight offers the ultimate in precision camera sighting. The polarized, optical eyesight produces a special Newton interference pattern  (a bulls-eye effect) that enables you to aim your cameras, quickly and precisely at the  target. The genuine Newton Ring Sight ensures precision sighting while also helping to correct for camera/eyesight parallax.
Please Note: This is a 1/4" ringsight and can only be used with 1/4" Swivel Clamps, No. L1361 Schumacher 1/4" Swivel Clamp, or No. L1237 Swivel Clamp and Mounting Post. Sold separately.
Shipping Weight: 6 oz. (170g).

1/4" ringsight. This economy-priced polarizing eyesight, once aligned with your camera’s viewfinder, enables you to quickly aim the camera on target. The reflective Newton pattern ( a series  of hyperbola forming a cross pattern ) ensures that, no matter how the headgear may shift, you will always be able to point the camera at the target seen in the center of the cross.
Shipping Weight: 6 oz. (170g).

6mm ringsight. The Newton Sight is designed for easy mounting on any type of camera headgear. Its cross  sight deadcenter, once aligned with the camera viewfinder, enables you to aim the camera  precisely at the target. The special Newton interface pattern ensures that no matter how the headgear may move, you will always be able to point the camera at the target seen in the Deadcenter of the cross. Without holder. (Picture to the right shows the Schumacher Articulating Ring Sight Bracket, Schumacher 6mm Swivel Clamp, and No. LB1234 Newton Cross Sight 6mm. Sold separately.)
Shipping Weight: 8 oz. (225g).

1/4" ringsight, Swivel Clamp, and Mounting Post. An easy-to-use transparent amber sight with center-spot to make centering your subject simple while at the same time causing no visual obstruction. This eyesight assembly comes standard on all Para-Mount Camera Systems. Eyesight assembly is simple to install and includes eyesight, adjustable swivel clamp, mounting post with attachment hardware and instructions for easy mounting to your headgear. Shipping Weight: 6 oz. (170g).

1/4" ringsight bracket. Same as No. L1365 Shumacher Articulating Ring Sight Bracket, except that this one is removable from its base with the simple loosening of its thumb screw. For those camera flyers who would like to quickly take off their sight for any reason, and have the added advantage to not have to realign the sight once it is put back on, then this is for you. After loosening the thumb screw, the top part of the bracket slides off leaving only the low profile base still attached to your headgear. You can then put the top part of the base with the shaft, swivel clamp, and ring sight still attached together in a safe place for later use. It could not be quicker or easier than this.
This bracket was also made to solve the problem of freefly headgear having no forehead area. The problem is that in order to mount a ring sight, you must place it too far away from your eye in order to avoid jamming it into your eye while putting the headgear on. This makes it hard to use a sight and the metal juts so far out that it is a safety hazard. The articulating clamp allows you to mount a post that is spring  loaded and rotates 90 degrees to allow you to move the sight out of the way and  put the headgear on. Then rotate the shaft to move the sight  back into place. The three contoured feet assures a tight fit on the curved headgear.  Once you have installed the bracket on the headgear and have tested the sighting and fit, you can cut off the extra length of the shaft. Kit comes with three Allen head mounting screws, Allen wrench, and articulating bracket.  It's the perfect way to add a ring sight to most of today's freefly headgear.  The sight mounts to this bracket with a normal swivel clamp. (Picture to the right shows the Schumacher Articulating Ring Sight Bracket, Schumacher Swivel Clamp, and Brent's Cross Sight. Sold separately.)
Please Note: This is a 1/4" ringsight bracket and can only be used with 1/4" Swivel Clamps, No. L1361 Schumacher 1/4" Swivel Clamp, or No. L1366 Schumacher 1/4" X 6mm Swivel Clamp (This Swivel Clamp is only used if you are coupling it with a 6mm ringsight). Sold separately.
Shipping Weight: 4 oz. (120g).

1/4" ringsight bracket. This bracket was made to solve the problem of freefly headgear having no forehead area. The problem is that in order to mount a ring sight, you must place it too far away from your eye in order to avoid jamming it into your eye while putting the headgear on. This makes it hard to use a sight and the metal juts so far out that it is a safety hazard. The articulating clamp allows you to mount a post that is spring  loaded and rotates 90 degrees to allow you to move the sight out of the way and  put the headgear on. Then rotate the shaft to move the sight  back into place. The three contoured feet assures a tight fit on the curved headgear.  Once you have installed the bracket on the headgear and have tested the sighting and fit, you can cut off the extra length of the shaft. Kit comes with three Allen head mounting screws, Allen wrench, and articulating bracket.  It's the perfect way to add a ring sight to most of today's freefly headgear.  The sight mounts to this bracket with a normal swivel clamp. (Picture to the right shows the Schumacher Articulating Ring Sight Bracket, Schumacher Swivel Clamp, and Brent's Cross Sight. Sold separately.)
Please Note: This is a 1/4" ringsight bracket and can only be used with 1/4" Swivel Clamps, No. L1361 Schumacher 1/4" Swivel Clamp, or No. L1366 Schumacher 1/4" X 6mm Swivel Clamp (This Swivel Clamp is only used if you are coupling it with a 6mm ringsight). Sold separately.
Shipping Weight: 4 oz. (120g).

These quality swivel clamps were machined precisely to hold a ring sight in place. Most machine shop clamps are made to hold gauges, etc. and can't take the high torque that your sight goes through with random bumps and knocks. This clamp has a semi circle binding ring that ensures maximum holding power. Because it is aluminum it will not rust. The new and improved design replaces the old knurled thumbwheel with a low profile Allen screw. This makes the clamp less likely to snag a line during an unstable deployment. The clamp comes with an Allen wrench for your toolkit. (Picture to the right shows the Schumacher Articulating Ring Sight Bracket, Schumacher Swivel Clamp, and Brent's Cross Sight. Sold separately.)
Please Note: This is a 1/4" Swivel Clamp and is meant to be used with any 1/4" ringsight and any 1/4" Mounting Post or No. L1365 Schumacher Articulating Ringsight Bracket. Sold separately.
Shipping Weight: 4 oz. (120g).

These quality swivel clamps were machined precisely to hold a ring sight in place. Most machine shop clamps are made to hold gauges, etc. and can't take the high torque that your sight goes through with random bumps and knocks. This clamp has a semi circle binding ring (see the arrow above) that ensures maximum holding power. Because it is aluminum it will not rust. The new and improved design replaces the old knurled thumbwheel with a low profile Allen screw. This makes the clamp less likely to snag a line during an unstable deployment. The clamp comes with an Allen wrench for your toolkit. (Picture to the right shows the Schumacher Articulating Ring Sight Bracket, Schumacher Swivel Clamp, and Brent's Cross Sight. Sold separately.)
Please Note: This is a 1/4" X 6mm Swivel Clamp and is meant to be used with any 6mm ringsight and any 1/4" Mounting Post or No. L1365 Schumacher Articulating Ringsight Bracket. Sold separately.
Shipping Weight: 4 oz. (120g).

This aluminum post is slightly longer than most hardware store posts, and milled to exact dimensions for precise fit. Because it is aluminum it will not rust.
Please Note: This is a 1/4" Mounting Post and can only be used with 1/4" Swivel Clamps, No. L1361 Schumacher 1/4" Swivel Clamp, or No. L1366 Schumacher 1/4" X 6mm Swivel Clamp (This Swivel Clamp is only used if you are coupling it with a 6mm ringsight). Sold separately.
Shipping Weight: 4 oz. (120g).

This aluminum post is slightly longer than most hardware store posts, and milled to exact dimensions for precise fit. Because it is aluminum it will not rust.
Please Note: This is a 6mm Mounting Post and can only be used with 6mm Swivel Clamps, or No. L1363 Schumacher 6mm Swivel Clamp. Sold separately.
Shipping Weight: 4 oz. (120g).

6mm Swivel Clamp and Mounting Post. Can only be used with 6mm ringsights, No. L1359 or No. LB1242. Sold separately.
Shipping Weight: 6 oz. (170g).

1/4" Swivel Clamp and Mounting Post. Can only be used with 1/4" ringsights, or No. L1360, No. L1235 and No. L1236.  Shipping Weight: 6 oz. (170g).

This is Bonehead's Flat-Top retrofit cutaway system. It is meant for being able to quickly cutaway your headgear in case of an emergency in the air or on the ground. Using this cut away system during freefall will most likely result in the loss of your headgear & camera equipment. This Flat-Top retrofit cutaway system can be used in conjunction with the Flat-Top Pro and Flat-Top Narrow headgear. The retrofit cutaway system consists of new hardware for your back latch, and a loop cutaway cable.

The aluminum Shark Fin is used for taking vertical still pictures with your camera. It is intended to be mounted to a flat top surface on your headgear. Three included screws are to be attached to the headgear. A separate foam pad for friction is included and is pictured attached to the aluminum Shark Fin here. An included camera tripod screw will then secure your camera to the aluminum Shark Fin. 3 3/4" W x 5 1/2" H x 1 1/2" D. Camera not included.
Shipping Weight: 1 lb. (455g).

This simple streamlined attachment with clear cover will allow you to mount a Pro-Dytter or Pro-Track to you Gath. It also allows easy access to the buttons. Comes with directions.
Shipping Weight: 1 lb. (455g).

Ever wonder how people captured these great images? Well here it is. This belly mount offers a unique point of view to any activity. Whether skydiving, snow-skiing, or doing many other activities, this fully adjustable mount can do the job. The Bel-Vue is constructed using a strong carbon fiber plate, firmly attached to a comfortable, adjustable body pad. The camera attaches to a unique, rugged mount that offers the user virtually every camera angle. Even multiple cameras are possible. So, if you are swooping, following behind, or filming yourself and want that unique camera angle, you'll need one of these! The Bel-Vue Plate measures: H 8"x W 10.5"  The camera mount extends outward 7.5".
Shipping Weight: 3 lbs. (1.36kg).

The Shu-Vue gives you a dynamic shot from the bottom of your sole. This camera mount is specifically designed to mount to your foot for great video and still shots. The camera attaches to a unique, rugged mount that offers the user virtually every camera angle. It utilizes a shorter version of the mount than on the Bel-Vue. The Shu-Vue also has a release system to quickly detach it from the user. It is supplied with an 'L' Bracket. Additional mounting hardware not included.
Shipping Weight: 2 lbs. (910g).

This side mount is designed for the Ion and Velocity headgear, however can be mounted to other headgear. The easy to attach, camera-ready video platform is designed to fit the newer Mini-DV Sony video cameras such as the Sony PC 1, 3, 5, 7, 8, 9, 10, 100, 101, 110, 102 (but not limited to just these cameras) as well as JVC 3U & 5U digital cameras. A great feature of this video side mount is that it offers variable pitch. This allows adjustment of the video camera angle, up or down, anywhere from zero to 30 degrees in either direction. The mount can also be rotated 180 degrees allowing for inverted camera attachment. 3" W x 4 1/4" H x 2" D. Camera not included.
Shipping Weight: 12 oz. (340g).

This top mount platform (Pictured here between the Velocity headgear and camera) is used to attach either a still or video camera to the top of one's headgear. It requires that you drill two holes on the top of the headgear for mounting, and can be adjusted slightly fore or aft from its original mounting spot to obtain the proper angle. A simple finger twisting lock screw allows for easy access to the mounting plate of the camera, letting you easily mount and remove your camera. An adjustable strap for wrapping around the camera adds to stability. This top mount was made for the Velocity headgear, however will work with most other headgear with a curved top dome. It measures about 6 1/2" L x 3" W x 1 1/4 - 1 1/2" D. Camera not included.
Shipping Weight: 12 oz. (340g).

This self contained unit is designed to work with video cameras that are equipped with a 6-9 volt DC OUT jack (3/32") and external tally light. The device uses your video camera's battery as a power source. When the unit is installed properly and the video camera is powered up, a Green LED will illuminate. When the camera is recording, a Red LED will illuminate. The easy-to-see LED's glow brightly and can be seen throughout the skydive. The SkyLight 2 is easy to install and comes with mounting instructions and everything necessary to attach to your camera headgear.
Shipping Weight: 1 lb. (455g).

1" wide X 60 yards long. This high quality, matte-surface, coated cotton cloth tape provides maximum strength adhesion and yet does not leave a gummy residue on equipment.
Shipping Weight: 1 lb. (455g).

1" wide X 14" long. This is a heavy duty replacement for Velcro for simple and secure attachment of just about anything. Camera-Loc is the means of camera attachment on the Para*Mount Camera Systems. Extremely strong tape to tape mating is easy to achieve by simply pressing two strips together. The tape attaches to most any surface by simply removing the liner to expose the pressure sensitive adhesive. When engaged to itself the Camera-Loc gives an audible snap which assures closure and can be re-closed hundreds of times.
Shipping Weight: 4 oz. (110g).

1" wide X 36" long. This is a heavy duty replacement for Velcro for simple and secure attachment of just about anything. Camera-Loc is the means of camera attachment on the Para*Mount Camera Systems. Extremely strong tape to tape mating is easy to achieve by simply pressing two strips together. The tape attaches to most any surface by simply removing the liner to expose the pressure sensitive adhesive. When engaged to itself the Camera-Loc gives an audible snap which assures closure and can be re-closed hundreds of times.
Shipping Weight: 4 oz. (110g).