.
.
Rigging Page 2
.
.

Rigging Page 2




Products
Display Results By .
Items 1 - 34 of 34         
Page:

S7495 - PROFESSIONAL RIGGER KIT BAG

PROFESSIONAL RIGGER KIT BAG
Over three years of development and field testing has resulted in the most complete and comprehensive Rigger's Kit Bag available today. This has pockets for over 26 different tools, a pocket for manuals, [More...]

Price: $195.00
Qty . . .
S7210 - NEEDLES

NEEDLES
If you do any amount of jumping or rigging, you need these 15 assorted needles.
Quantity Discount

6 - 19: $5.25
20 or more: $4.50

Price: $6.00
Qty
S7190 - SEWING PALM

SEWING PALM
A leather tool used to hand-sew harness and other heavy material. Right hand.

Price: $11.00
Qty
S7405 - PACKING PIN WITH FLAG

PACKING PIN WITH FLAG
Used to temporarily hold pack closed prior to inserting the actual ripcord. Extra long cable length with extra long warning flag installed.
Quantity Discount

6 - 19: $3.50
20 or more: $3.00

Price: $4.00
Qty
S7425 - CYPRES TEMPORARY PACKING PIN

CYPRES TEMPORARY PACKING PIN
Needed for packing Cypres equipped rigs where there is a small loop. Original equipment, comes with warning flag installed.

Price: $4.00
Qty
I1535 - CYPRES LOOP MATERIAL - 50 METER SPOOL

CYPRES LOOP MATERIAL - 50 METE
50 meter spool of Cypres reserve closing loop material. The Cypres loop material increases the safety of its user regardless if a Cypres is in the rig or not. It does this by improving the opening performance [More...]

Price: $25.00
Qty
W9523 - CYPRES CLOSING LOOP

CYPRES CLOSING LOOP
This is the loop you use on one pin reserves when a Cypres is installed. This is only the loop, made from the Cypres loop material, and uses existing Cypres washer. The Cypres loop increases the safety [More...]

Price: $3.00
Qty
I1524N - PACKERS KIT FOR CYPRES

PACKERS KIT FOR CYPRES
This is a package of replacement parts that a rigger will need from time to time when packing rigs with Cypres installations. The Cypres Packers Kit also contains everything necessary to equip rigs with [More...]

Price: $35.00
Qty
S7935 - HOLLOW END TEMPORARY PIN

HOLLOW END TEMPORARY PIN
The ideal tool to solve the problem with those tight reserve closing loops. This curved hollow ended temporary pin allows the dull round ripcord pin to easily push through the closing loop. Since the [More...]
Quantity Discount

6 - 19: $12.20
20 or more: $10.50

Price: $14.00
Qty
S7938 - HOLLOW END TEMPORARY PIN (FOR RSL PINS)

HOLLOW END TEMPORARY PIN (FOR
Same as No. S7935, but is made for large diameter RSL pins. It's even harder to get the RSL pin through the Cypres loop, and this makes it much easier.
The ideal tool to solve the problem with those [More...]
Quantity Discount

6 - 19: $12.20
20 or more: $10.50

Price: $14.00
Qty
S7470 - SEAM RIPPER

SEAM RIPPER
For picking stitches and ripping out seams in a hurry.
Quantity Discount

6 - 19: $5.10
20 or more: $4.20

Price: $6.00
Qty
S7989 - FABRIC TESTING CLAMP AND SCALE KIT

FABRIC TESTING CLAMP AND SCALE
This set of tools is used to perform Parachute Industry Association TS-108 Fabric Strength Test. Replaces the old "rigger thumb test". Comes with two fabric clamps, one 50 lb. Scale, one 1-oz. bottle [More...]

Price: $145.00
Qty
S7989SC - SCALE - 50 LB

SCALE - 50 LB
This is the same 50 lb. Scale used with fabric testing clamp and scale kit, just sold separately.

Price: $39.95
Qty
S79875 - FABRIC TESTING CLAMPS ONLY

FABRIC TESTING CLAMPS ONLY

Price: $95.00
Qty
S7989BGS - BROMOCRESOL GREEN SOLUTION

BROMOCRESOL GREEN SOLUTION
1 oz. bottle with eye-opener and instructions. A must for testing pH of mesh according to manufacturerÆs service bulletins.

Price: $9.50
Qty
S7376 - MARLIN SPIKE

MARLIN SPIKE
Made from high grade carbon steel carefully hardened and tempered. Ideal for opening up webbing to cut away stitching or to make openings in material to install grommets.

Price: $41.00
Qty
S7480 - MINI-PUNCH SET

MINI-PUNCH SET
A special punch set for cutting small precise holes in materials. Set consists of handle, threaded to accommodate seven replaceable screw tubes. Cutting tube sizes are 5/64", 3/32", 7/64", 5/32", 11/64", [More...]

Price: $38.00
Qty
S7430 - SELF-CENTERING PUNCH SET

SELF-CENTERING PUNCH SET
This versatile kit contains threaded handle with self-centering spring loaded pointed plunter. The handle will accommodate nine cutting tubes with sizes of 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", [More...]

Price: $86.00
Qty
S7530 - AUTOMATIC AWL

AUTOMATIC AWL
Ideal for sewing nylon, leather or canvas. The awl carries a spool of thread on the handle. Hollow handle holds extra curved needle and wrench. Directions with each awl for automatic lock stitch. One [More...]

Price: $21.00
Qty
S7540 - REPLACEMENT NEEDLES FOR AUTOMATIC AWL (2)

REPLACEMENT NEEDLES FOR AUTOMA
Sold by the package of two only.

Price: $8.00
Qty
S7590 - REVOLVING PUNCH

REVOLVING PUNCH
A fine quality pressed frame revolving punch. All tubes are heat treated to give long wear. Furnished with tube sizes 0, 1, 2, 3, 5 and 7 for rigging work. 8 inches long.

Price: $17.00
Qty
S7570 - PUNCH

PUNCH
These Drive Punches are forged from the best grade tool steel, carefully hardened and tempered with polished barrel. The hole tapers back from the cutting edge so that the punchings clear freely and require [More...]
Quantity Discount

6 or more: $19.80

Price: $22.00
Qty . . .
S7670 - CUTTING PAD

CUTTING PAD
Made of resilient vinyl plastic, these tough cutting pads are ideal for use with arch punches or belt punches. They are long wearing and can be used on both sides. Cutting pads must be used on a solid [More...]

Price: $22.50
Qty
S7650 - RAWHIDE MALLET

RAWHIDE MALLET
The head is made entirely of rolled rawhide. Handle of white hickory. It is useful in many places where the user wishes to avoid scaring. 1 3/4" diameter head.

Price: $39.00
Qty
S7995 - STAINLESS STEEL FID (SET OF 3)

STAINLESS STEEL FID (SET OF 3)
These fids are made from stainless steel. Each fid is about 3 1/4" long and the set has one 2.25mm in diameter, one 3.5mm in diameter, and one 4.5mm in diameter fid. One of these fids will finger trap [More...]
Quantity Discount

6 - 19: $29.00
20 or more: $24.75

Price: $33.00
Qty
S7979 - FINGER TRAPPING FID SET

FINGER TRAPPING FID SET
These fids are made of durable, almost impossible to break, Delrin plastic. Set of 3 different sizes, one will finger trap any of the hollow braided suspension lines currently on the market. In addition [More...]
Quantity Discount

6 - 19: $7.95
20 or more: $6.75

Price: $9.00
Qty
S7668 - MOLAR STRAP

MOLAR STRAP
Popular tool used in packing square reserves in one pin containers. The molar strap aids in controlling canopy so that it can be neatly inserted into deployment bag. Long tail acts as flag to insure removal [More...]

Price: $7.50
Qty
S7700 - CHUCK HOLDER

CHUCK HOLDER
A tool that holds all chucks listed, while using a light hammer to cinch fittings. Used in conjunction with No. S7710 Die Holder. Can be used to hold No. S7890 Easy Open Stud Chuck, No. S7910 Easy Open [More...]

Price: $19.50
Qty
S7710 - DIE HOLDER

DIE HOLDER
Holds die upright on bench. Used in conjunction with No. S7700 Chuck Holder.
Can be used to hold No. S7890 Easy Open Eyelet Die, No. S7910 Easy Open Button Die, No. S7921 Pull-The-Dot Eyelet Die, [More...]

Price: $39.50
Qty
S7760 - GROMMET AND WASHER - 9/16"

GROMMET AND WASHER - 9/16''
9/16" in diameter. Nickel plated brass. MS22048-C1.
Quantity Discount

6 - 19: $1.25
20 - 99: $1.15
100 or more: $1.05

Price: $1.30
Qty
S7770 - GROMMET AND WASHER - 7/16"

GROMMET AND WASHER - 7/16''
7/16" in diameter. Nickel plated brass. MS22048-C2.
Quantity Discount

6 - 19: $1.25
20 - 99: $1.15
100 or more: $1.05

Price: $1.30
Qty
S7760-S - GROMMET AND SEW-ON WASHER - 9/16"

GROMMET AND SEW-ON WASHER - 9/
9/16" in diameter. Same as No. S7760 except the washer is the sew on type.
Quantity Discount

6 - 19: $3.15
20 - 99: $2.98
100 or more: $2.80

Price: $3.50
Qty
S7770-S - GROMMET AND SEW-ON WASHER - 7/16"

GROMMET AND SEW-ON WASHER - 7/
7/16" in diameter. Same as No. S7770 except the washer is the sew on type.
Quantity Discount

6 - 19: $3.15
20 - 99: $2.98
100 or more: $2.80

Price: $3.50
Qty
S7510 - HEAVY DUTY SCRATCH AWLS

HEAVY DUTY SCRATCH AWLS
Made in four sizes for your convenience. Best quality steel blades with rugged plastic handles. Used for piercing heavy material, hand sewing, and tacking.

Price: $4.50
Qty . . .


Show items per page
Items 1 - 34 of 34         
Page:
.
.